Implementing high-speed near field communication (NFC) between two independent devices has been made easier with the introduction of the AS3953 interface chip from ams. The IC offers a high data-rate, bidirectional interface between an NFC device such as a smartphone and any host microcontroller with a standard serial peripheral interface (SPI).
Operating on energy harvested from an NFC reader’s RF emissions, the AS3953 NFiC (near field communications interface chip) requires no external power source and at most one external component (a capacitor).
The device is fully compliant with NFC Forum specifications (NFCIP-1 target at 106 Kbps) and the ISO14443A industry standard (up to 848 Kbps, to Level 4). This means that it can be used in contactless smartcards and as an NFC Forum-compatible interface tag, and can establish instant communication with any NFC-enabled phone in close proximity (<10 cm).
The AS3953 is expected to find uses in a wide variety of applications, including contactless passive programming of MCU-based systems, smartcards with displays, smart retail shelf labels, sensors and ultra low-power data loggers, medical devices and secured NFC Bluetooth pairing.
It can also enable innovative new approaches to system designs by using an NFC-enabled smartphone as a display host and system controller for normally standalone devices, eliminating the requirement for the slave device to have its own display and processor.
The IC features a configurable wake-up interrupt, enabling a zero-power system design while shut down. It also contains a complete analog front end, 1 KB of internal EEPROM, and a 4-wire SPI with a 32-Byte FIFO.
The device can draw up to 5 mA of harvested energy from the external magnetic field, and includes an internal power management circuit that can supply harvested energy to the application. This makes it ideal for use with battery-powered and portable microcontroller-based devices.
High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...Enhance SiC device efficiency using merged-pin Schottky diodes NuVision Electronics
Editor's Choice Power Electronics / Power Management
Silicon carbide (SiC) has advantages over silicon (Si) that make it particularly suitable for Schottky diodes in applications such as fast battery chargers, photovoltaic (PV) battery converters, and traction inverters.
Read more...Redefining entry-level MCUs NuVision Electronics
DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
Read more...MCU for low-power, IoT applications NuVision Electronics
DSP, Micros & Memory
Silicon Labs recently announced the PG26, a general-purpose microcontroller with a dedicated matrix vector processor to enhance AI/ML hardware accelerator speeds.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version