Verotec has introduced new 3U 4HP versions of the EPLAX VeroPower family of 19” subrack pluggable AC-DC switched mode power supplies to add further capability to its KM6 subrack and metal enclosure families.
At only 4HP (2 cm) wide and a standard 160 mm deep, the new units leave ample space in the subrack for active system boards. They are available with power rails that suit the requirements of many embedded computing applications.
The complete VeroPower range consists of pluggable PSUs with power ratings from 20 to 150 W. Output power levels of 20, 40 and 50 W are available. The 20 and 40 W versions have 94–253 V a.c. autoranging inputs, while the 50 W has a 115/230 V a.c. switchable input.
The monovolt 20 W unit has single voltage rail outputs: 5 V/4 A; 12–15 V/1,4 A or 24 V/0,8 A. Three trivolt 40 W versions provide either 5 V/4 A, +12–15 V/0,6 A and -12–-15 V/0,6 A; +12–15 V/1,4 A, +12–15 V/0,6 A and -12–15 V/0,6 A; or 24 V/0,8 A, +12–15 V/1,4 A and -12-15 V/0,6 A. The monovolt 50 W unit gives 5 V/10 A, 12 V/4,2 A–15 V/3,3 A or 24 V/2,1 A.
All versions use the industry standard H15 connector and pin-out. All outputs are highly stable, with worst case line and load regulation a maximum of 0,1% and ripple typically less than 20 mVpp. Short circuit, output current limitation and output over-voltage protection are provided, and a powerfail signal is available on all 5 V rails.
ABB’s Mission to Zero drives South Africa’s energy transition ABB Electrification Products
Power Electronics / Power Management
ABB Electrification is charting a bold path towards a net-zero future with its Mission to Zero programme, a blueprint that combines energy efficiency, electrification, and digital innovation to accelerate the transition to clean energy.
Read more...Energy harvesting using a battery-less IoT system NuVision Electronics
Editor's Choice Power Electronics / Power Management
Energy Harvesting plays an essential role in the foundation of ambient IoT, a new generation of ultra-low power connected devices that operate by drawing energy from their environment instead of relying on traditional batteries.
Read more...Driving power, defining performance Future Electronics
Power Electronics / Power Management
Vishay’s portfolio of inductors, current sense resistors, and MOSFETs provides a comprehensive solution for intelligent power management.
Read more...Battery simulator module simplifies BMS testing Test Dynamics
Power Electronics / Power Management
The PXI/PXIe solution from Pickering Interfaces offers a scalable, modular design for faster development cycles, lower total cost of ownership, and improved safety.
Read more...DC PSU: The cornerstone for efficient solar-storage systems Vepac Electronics
Power Electronics / Power Management
PV energy storage systems are evolving and DC power supplies, with their technical characteristics that are naturally compatible with new energy, have become a key carrier for improving system energy efficiency.
Read more...Converter power modules for 48 V networks Altron Arrow
Power Electronics / Power Management
The economic and quality-of-life benefits of electrification is driving the adoption of HV to 48 V DC-DC conversion across many markets with 48 V power modules becoming more common.
Read more...The importance of power integrity Spectrum Concepts
Power Electronics / Power Management
[Sponsored] Behind every high-speed system lies the need for power integrity. Without it, even the cleanest signal paths become compromised.
Read more...Cabinets for industrial applications Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
Verotec’s VERAK cabinets addresses the most stringent enclosure requirements providing both IP65 environmental protection and EMC screening.
Read more...Precise multi-vital sign monitoring Future Electronics
Power Electronics / Power Management
The AS7058 by ams OSRAM is an integrated multi-vital sign monitoring device, which provides a complete photoplethysmogram, electrocardiogram, body impedance sensor, and electrodermal activity sensor.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version