Verotec has redesigned its flagship Verotec case with an improved structural design that gives increased strength and rigidity without compromising its clean, uncluttered appearance.
It is designed for high-end instrumentation applications, but is equally suitable for applications such as telecommunications, industrial control equipment and desktop computing.
If required, the enclosures can be both IP54 and EMC screened, either factory fitted under the TecServ+ added-value programme or the required gaskets and panels can easily be retrofitted by the customer. The standard case provides a commercial level of RFI attenuation that should prove suitable for most applications, but if a higher level of EMC performance is required, an EMC upgrade kit, consisting of tinned copper fingers and EMC front and rear panels, increases attenuation to 80 dB @ 100 MHz and 50 dB @ 1 GHz.
The enclosures have no visible fixings and are now available in two basic versions: the Verotec case, complete with 19” panel mountings, and the Verotec caseframe assembly, pre-fitted with KM6-II tiebars for directly mounting standard Eurocards.
The Verotec case is available as standard in 1U, 2U, 3U and 6U heights, in 10,5” and 19” widths, with depths of 260, 300 and 400 mm in all sizes. In addition, the 6U 19” case is also available in an extended 500 mm depth. The caseframe version is available in 3U and 6U heights to suit standard Eurocard sizes, in 42HP and 84HP widths and depths of 260, 300 and 400 mm.
As standard, the case is finished in a fine texture epoxy powder coat in light grey RAL7035 or as a two-tone version with the body of the case in RAL7035 and contrasting corner trims in anthracite, RAL7016.
SIGLENT launches new 8?GHz DSO Vepac Electronics
Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.
Read more...Battery modules with lithium iron phosphate technology Phoenix Contact
Enclosures, Racks, Cabinets & Panel Products
With its new lithium battery modules with IQ Technology, Phoenix Contact is expanding its portfolio with powerful energy storage solutions with a capacity of 284 Wh.
Read more...Mission-critical RF transceiver Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.
Read more...Smallest 13th gen Intel SBC Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...Versatile PoE extender Vepac Electronics
Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.
Read more...Transporting and storing lithium-ion batteries
Enclosures, Racks, Cabinets & Panel Products
Lithium-ion batteries have become ubiquitous in modern life, but along with their benefits comes a serious challenge: these batteries pose fire and safety risks and are classified as dangerous goods for transport.
Read more...Non-contact safety door switch Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, designed to enhance workplace safety and streamline machinery operations.
Read more...Easy installation panel mount assembly Future Electronics
Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.
Read more...Ultra-portable spectrum analyser Vepac Electronics
Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.
Read more...Versatile 3-in-1 instrument Vepac Electronics
Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version