Enclosures, Racks, Cabinets & Panel Products


Polyester vs stainless steel enclosures

2 April 2014 Enclosures, Racks, Cabinets & Panel Products

Elen Enclosures says that one of the most common requests it gets is from customers requesting a stainless steel enclosure because it needs to be strong and survive in a corrosive environment.

As it turns out however, stainless steel is not always the best choice. In fact, money can be saved by choosing a more suitable material for the application.

The use of stainless steel (i.e. grades 304, 304L, 316 and 316L) in the manufacture of enclosures is intended for applications where hygiene is a consideration. This is because it is easily cleaned or disinfected and therefore provides an excellent solution in the food, beverage and pharmaceutical industries. While stainless steel is strong, once it is dented it is almost impossible to get it back to its original shape to maintain the sealing. It is also a good conductor of heat, so there is always the risk of overheating the internal components when mounted in hot areas in full sun.

When it comes to corrosion resistance, stainless is excellent for certain types of chemicals but not that great for others. Chemicals that negatively affect it include aqua regia (platinum concentrators), hydrochloric acid (20% - 100% concentrations, and dry gas), hydrofluoric acid, sulphur dioxide, sulphuric acid, chlorine water (water treatment plants) and sea water.

The enclosure material of choice for harsh corrosive industrial applications, where hygiene is not a concern, is polyester: to be more specific, sheet-mould-compound glassfibre reinforced polyester (GRP). It is high-temperature high-pressure moulded to produce a strong enclosure wall structure with impact resistance rating of IK10. Wall thickness is approximately 3-4 mm. GRP is resistant to the chemicals mentioned above as well as others, is easy to work with and is about half the price of a stainless steel equivalent.

While UV does affect the surface slightly, tests and experience show a loss of about 5 microns per year in full sun. This is insignificant with a 3-4 mm wall thickness on the enclosure. After many years in the plant the surface may look a bit rough, but nothing else in the dirty corrosive environment will be looking particularly pretty either. The mechanical strength and sealing of the enclosure is not affected by this at all.

So, for system installations at breweries, dairies or pharmaceutical factories, a grade 304L stainless steel enclosure IP66 certified and manufactured by Schneider Electric Universal Enclosures is the ideal solution. However, for an enclosure that needs to live out the rest of its days in a filthy, corrosive environment, a GRP enclosure is the solution. That is, a GRP enclosure made of one-piece-moulded base with an integral canopy over the top and bottom of the door, locks that are situated outside of the sealed area and non-rusting hinge pins. The Schneider Electric Thalassa PLM series is ideal for these applications.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Enclosures for small table-top instruments
30 September 2020, Avnet Abacus , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Enclosures for mounting electronic applications
30 September 2020, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove ...

Read more...
Stylish new plastic enclosure family
30 September 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has announced its new 1557 family. Initially available in four plan sizes, each in two heights, it is available in polycarbonate sealed to IP68 and ABS designed to meet IP66. The sizes ...

Read more...
Range of DIN rail enclosures
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
The CNMB range of DIN rail enclosures provides a diverse selection of modular housings which are available in eight set lengths. They are optimised for a wide range of electrical and electronics industries ...

Read more...
Rittal’s range of compact and small enclosures
30 September 2020 , Enclosures, Racks, Cabinets & Panel Products
After more than 50 years and 35 million enclosures sold, Rittal has introduced its small and compact enclosures in the form of the AX and KX series. According to managing director of Rittal South Africa, ...

Read more...
Versatile rack cases
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
Rack cases are a key building block of rack mounting systems, enabling electronic, electric and electro-mechanical sub-systems and assemblies to be mounted easily in any standard 19” enclosure. For ...

Read more...
Industrial enclosures in stainless steel
31 August 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The IP66 EJSS family from Hammond Electronics is available in 304 or 316 grade stainless steel, supplied as standard in a natural smooth brushed finish. Sealed to IP66, the EJSS is designed for use as ...

Read more...
Navigating EMI challenges in next-generation railway technology
31 August 2020, Actum Group , Enclosures, Racks, Cabinets & Panel Products
The advent of new-age connectivity, such as 5G networks and LTE, has enabled railway systems to process higher volumes of data digitally, which has significantly improved operational safety, efficiency ...

Read more...
DIN rail enclosures
30 June 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic enclosures for mounting to standard IEC/EN 60715 35 mm DIN rails for applications such as industrial control equipment, ...

Read more...
Company profile: Rittal
30 June 2020, Rittal , Enclosures, Racks, Cabinets & Panel Products
Rittal was founded by Prof. Friedhelm Loh in 1961 in Herborn, Germany. The enclosure specialist forms part of a larger family-owned group called the Friedhelm Loh Group. Today, the company has 10 000 ...

Read more...