ERNI is complementing its 100 Ω PCI Express (PCIe) family with a new 85 Ω right angle connector series for situations when low clearance above a printed circuit board prohibits the use of vertical configurations.
The card edge connectors enable an add-on card to be mounted parallel to the motherboard, saving space in the overall height allowed within the chassis.
Designed to the requirements of the PCI Express architecture that calls for a high performance point-to-point full duplex I/O bus connector, the ERNI connector series meets all PCIe Local Bus Standards Rev. 3.0. The right angle connector’s footprint is identical to the standard vertical mount configuration.
The 85 Ω connectors come in X1, X4, X8, X16 and new X24 versions with stack heights of 5,84 mm and 11,18 mm in through-hole format. The 100 Ω versions come in X1, X4, X8 and X16 versions with three standard stack heights of 5,84 mm, 11,18 mm and 16,68 mm, also in through-hole format. New additions to both product families include longer terminal/tail lengths and 30 micro-inch gold plating options.
The connector pins are insert moulded into the connector to allow for exact registration of the contacts on both the daughter card side and the board mount side. The connector itself is moulded from a high-temperature plastic to allow the connector to withstand the higher reflow and IR temperatures required for processing lead-free components. The overall rugged construction of this connector makes it well suited for consumer, server and industrial applications.
Clearing the Static: Effectively control static in your workplace Actum Electronics
Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.
Read more...Blade terminals deliver greater power density Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Film and mica capacitors Actum Electronics
Passive Components
By utilising various polymer dielectrics plastics, Exxelia film and mica capacitors meet most technical requirements and serve all functions from standard filtering to specialised applications.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.