SynQor’s introduction of the PowerQor series of fully isolated DC-DC modular power converters operate at efficiencies greater than 90% for a 3,3 V, 30 A output.
The modules produce little enough heat that they do not require a heatsink to keep their components cool.
The product line caters for output voltages of 15 V, 12 V, 5 V, 3,3 V, 2,5 , 2 V and 1,5 V. All units draw power from a 48 V nominal input (36 V to 75 V) and deliver either 150 W or 30 A. The converters use MOSFET synchronous rectifiers, as well as a fixed switching frequency converter topology, to achieve rectification with minimal loss, even at very low output voltages.
PowerQor converters are predominantly applicable to distributed and/or redundant power supply systems, where isolated low voltages are needed to power the load circuitry of complex electronic equipment. They feature a low profile (10 mm) and small footprint (58,4 x 61 mm) allowing designers to maximise valuable board space and minimise spacing between boards in a rack configuration.
With its low profile and no heatsink, the converter does not block airflow to other board components, and its low weight of 54 g reduces the adverse effects of shock and vibration on the end product. PowerQor uses the industry standard pin-out configuration employed by comparably sized and rated DC-DC converters.
A calculated mean time between failure (MTBF) in excess of 2 million hours is achieved through the integration of practical control and protection features to facilitate system design. All PowerQor series products offer on/off control, remote sense, output voltage trim, input under-voltage lockout, input over-voltage shutdown, output current limit, output over-voltage limit and temperature limit.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
Read more...Simulating grid abnormalities Conical Technologies
Power Electronics / Power Management
Simulating grid abnormalities has become an essential part of validating systems such as inverters, UPS units, photovoltaic inverters, and EV charging infrastructure.
Read more...Evaluation board for STPMIC25 PMIC
Power Electronics / Power Management
The STEVAL-PMIC25V1 is a power management IC evaluation board for the highly integrated STPMIC25, which is designed to manage the power requirements of the core, memory, and interfaces of the STM32MP2x series MPU.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version