32-bit microcontrollers
4 February 2015
DSP, Micros & Memory
Microchip announced a new series of its low-cost, high pin-count 32-bit PIC32 microcontrollers (MCUs). By blending the key features of the existing PICM32MX1/2 and PIC32MX5 MCU families, this latest PIC32MX1/2/5 series delivers the benefits of a rich peripheral set for a wide range of cost-sensitive applications that require complex code.
With up to 83 DMIPS performance and large, scalable memory options from 512/64 KB Flash/RAM to 64/8 KB Flash/RAM, these new MCUs are ideal for executing the Bluetooth audio software required for low-cost Bluetooth audio applications, such as speakers, consumer music player docks, noise cancelling headsets and clock radios.
Flexible, easy-to-use CAN2.0B controllers are also integrated into these MCUs, with DeviceNet addressing support and programmable bit rates up to 1 Mbps, along with system RAM for storing up to 1024 messages in 32 buffers. This feature allows designers to easily employ CAN communication schemes for industrial and automotive applications.
The new series boasts a wide variety of additional features, including four SPI/I2S interfaces for audio processing and playback, a parallel master port (PMP) and capacitive touch sensing hardware for graphics and touch sensing interfaces; a 10-bit, 1 MSps, 48-channel analog-to-digital converter (ADC); as well as a full-speed USB 2.0 device/host/OTG peripheral. To maximise data throughput, each MCU includes four general-purpose direct memory access (DMA) controllers and two dedicated DMAs on each CAN and USB module.
Readily available software packages, such as Bluetooth audio development suites, Bluetooth Serial Port Profile (SPP) library, audio equaliser filter libraries, various decoders (including AAC, MP3, WMA and SBC), sample-rate conversion libraries, CAN2.0B PLIBs, USB stacks, and graphics libraries can rapidly reduce the development time of applications.
For more information contact Shane Padayachee, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za
Further reading:
Cost-effective microcontroller series
Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...
Next generation HMI processing platform
Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...
Low-power SoC for IoT designs
iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...
Chip for high-density power
Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...
ARINC 429 line driver evaluation board
ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
Read more...
Lower-power Thread and BLE connectivity
iCorp Technologies
DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.
Read more...
printer friendly version