High-power programmable power supplies
10 June 2015
Power Electronics / Power Management
Murata announced an addition to its D1U4 series of AC-DC frontend power supplies. These programmable units feature a dual I²C interface and controllable bidirectional output isolation. They measure just 41 x 355,6 x 101,6 mm and allow up to four supplies to be contained on a single 1U-high, 19” rack-mounting chassis.
With a 54 V d.c. primary output and a standby 12 V d.c. for powering standby circuitry, the supply accommodates the input range of 90 to 264 V a.c. The main output of each unit is isolated and floating, enabling positive or negative polarity operation, and has a holdup time of 20 ms minimum at full rated power. Users have a choice of standard I²C or advanced PMBus communications.
The D1U4 series employs an advanced power conversion topology and uses a fixed switching frequency to minimise RFI and maximise efficiency. The supplies have no minimum load requirement, and support active current sharing and bidirectional output isolation via MOSFET.
The units are hot pluggable and are comprehensively protected against faults including over-voltage, over-current, over-power, over-temperature and short circuit conditions. They also feature extensive remote monitoring and diagnostic facilities – the supply’s output current and voltage, internal temperature, and hours of operation values can be retrieved via I²C or PMBus interface.
The D1U4 series currently comprises two models: a 12 V output model with power ratings of 1200 W, 1600 W and 2200 W, and a 54 V output model with a power rating of 1600 W. It incorporates low-noise fan cooling with automatic speed control, and has a storage temperature range of -40°C to +70°C. The power supplies meet the rigorous EN60950-1 standards, and comply with applicable EMC immunity standards per CQC and TUV.
For more information contact Arnold Perumal, Avnet South Africa, +27 (0)11 319 8600, [email protected], www.avnet.co.za
Further reading:
ABB’s Mission to Zero drives South Africa’s energy transition
ABB Electrification Products
Power Electronics / Power Management
ABB Electrification is charting a bold path towards a net-zero future with its Mission to Zero programme, a blueprint that combines energy efficiency, electrification, and digital innovation to accelerate the transition to clean energy.
Read more...
Energy harvesting using a battery-less IoT system
NuVision Electronics
Editor's Choice Power Electronics / Power Management
Energy Harvesting plays an essential role in the foundation of ambient IoT, a new generation of ultra-low power connected devices that operate by drawing energy from their environment instead of relying on traditional batteries.
Read more...
Driving power, defining performance
Future Electronics
Power Electronics / Power Management
Vishay’s portfolio of inductors, current sense resistors, and MOSFETs provides a comprehensive solution for intelligent power management.
Read more...
Battery simulator module simplifies BMS testing
Test Dynamics
Power Electronics / Power Management
The PXI/PXIe solution from Pickering Interfaces offers a scalable, modular design for faster development cycles, lower total cost of ownership, and improved safety.
Read more...
DC PSU: The cornerstone for efficient solar-storage systems
Vepac Electronics
Power Electronics / Power Management
PV energy storage systems are evolving and DC power supplies, with their technical characteristics that are naturally compatible with new energy, have become a key carrier for improving system energy efficiency.
Read more...
Why local manufacturing, maintenance and support are key to the success of South Africa’s energy future
Power Electronics / Power Management
Although new renewable generation capacity is being developed, the current transmission infrastructure may not fully support the connection of these sources to the national grid or adequately deliver power to areas of high demand.
Read more...
Converter power modules for 48 V networks
Altron Arrow
Power Electronics / Power Management
The economic and quality-of-life benefits of electrification is driving the adoption of HV to 48 V DC-DC conversion across many markets with 48 V power modules becoming more common.
Read more...
The importance of power integrity
Spectrum Concepts
Power Electronics / Power Management
[Sponsored] Behind every high-speed system lies the need for power integrity. Without it, even the cleanest signal paths become compromised.
Read more...
Precise multi-vital sign monitoring
Future Electronics
Power Electronics / Power Management
The AS7058 by ams OSRAM is an integrated multi-vital sign monitoring device, which provides a complete photoplethysmogram, electrocardiogram, body impedance sensor, and electrodermal activity sensor.
Read more...
Automotive battery diagnostics tester
Comtest
Power Electronics / Power Management
Midtronics’ MVT handheld battery tester is a revolutionary tool, powered by MDX-AI, which is set to redefine the standards of battery diagnostics and testing in the automotive industry.
Read more...
printer friendly version