Enclosures, Racks, Cabinets & Panel Products


19” rack handles seismic shocks

22 March 2017 Enclosures, Racks, Cabinets & Panel Products

Available as standard in sizes from 20U high, 58,42 cm wide and 60 cm deep to 49U high, 58,42 cm wide and 91,44 cm deep, typical applications include broadcast, test equipment, cabling cabinets, systems and general electronics.

The rack is rated to carry a 454 kg load when installed in a building sited on Soil Groups A, hard rock, down to D, stiff soil. To conform, the centre of mass of the load must be below the height centre line of the rack and the rack must be bolted to the floor of the building. The doors and panels are not structural elements, so the seismic rating applies to both open and clad racks.

The C2 19” rack is constructed from a 14-gauge steel fully welded frame, fitted with 16-gauge steel doors and side panels. For 19” equipment mounting, there is a choice of either 10-gauge steel tapped mounting rails or 12-gauge steel square hole mounting rails. The mounting rails are fully adjustable front to back within the rack to accommodate differing equipment depths.

A choice of top panels includes solid, vented, solid with fan cutouts or solid with pre-installed fans up to 550 CFM. A comprehensive range of dedicated accessories ensure that the great majority of projects and applications can be satisfied by configuring the rack from standard products. The C2 19” rack can be easily and quickly factory modified if required.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Optional inner panels for IP68/66 plastic enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s 1557 family has proved to be very popular since it was launched some two years ago and is increasingly being used as a housing for electromechanical components as well as PCB-mounted ...

Read more...
Outdoor housings for space-critical applications
Phoenix Contact Enclosures, Racks, Cabinets & Panel Products
New outdoor housings with an installation depth of 80 mm extend the portfolio of the ECS range of outdoor housings from Phoenix Contact. The smaller design allows device dimensions that are 75% more ...

Read more...
General-purpose plastic enclosures
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue-and-groove sealing ...

Read more...
Handheld plastic electronic instrument enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s 1552-Series handheld enclosures are available in six sizes. All models are 50 mm wide and either 22 or 30 mm high, with three length options available: 70 mm, 110 mm and 150 mm. The ...

Read more...
No need for custom enclosures thanks to rugged subrack system
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
The KM6-HD subrack range from Verotec meets the requirements of IEEE 1101.10 and 11, which expand on IEC60297 to add functionality required for modern industrial computing applications. This includes ...

Read more...
New EC centrifugal fans for more power and efficiency
Ebmpapst South Africa Enclosures, Racks, Cabinets & Panel Products
Ventilation and air conditioning fans are constantly being developed, as users’ demand for control options and energy efficiency in particular are increasing rapidly. Legal requirements, increasing awareness ...

Read more...
Small rectangular plastic enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Owing to its versatility, Hammond Manufacturing’s 1591 family is the company’s best-selling plastic enclosure range, with a wide choice of sizes and features. The 1591 family is available in five small ...

Read more...
Outdoor housings for space-critical applications
Phoenix Contact Enclosures, Racks, Cabinets & Panel Products
New outdoor housings with an installation depth of 80 mm extend the ECS range of outdoor housings from Phoenix Contact. The smaller design allows device dimensions that are 75% more compact. It is therefore ...

Read more...
Plastic electronics housings made to custom specs
Enclosures, Racks, Cabinets & Panel Products
Based in Pretoria, NewElec boasts production capabilities that are ideally suited for making customised plastic electronic housings using computer-controlled manufacturing equipment. The process is quick, ...

Read more...
Locally made, price-competitive SMC enclosures
Allbro Enclosures, Racks, Cabinets & Panel Products
The majority of electrical enclosures used in South Africa are coated with mild steel. Standard off-the-shelf sizes used to be locally manufactured but the tide of low-cost imported steel products has ...

Read more...