Enclosures, Racks, Cabinets & Panel Products


Pole kits extend enclosure mounting options

13 September 2017 Enclosures, Racks, Cabinets & Panel Products

Sealed enclosures are designed for indoor or outdoor installation, and they will normally have holes positioned outside the sealed area to enable the enclosure to be attached directly to flat surfaces without compromising the environmental protection.

In response to the need for small electronic monitoring and control systems to be installed in an increasingly wide variety of locations, Hammond Manufacturing has introduced an initial five sizes of pole mounting kit, which enable three sealed enclosure families to be attached to round, square or rectangular poles with diameters from 38 to 381 mm. The corrosion resistant stainless steel kits reduce installation time and secure the enclosure against twisting once installed.

The initial range of kits are sized to fit the 1554/1555 IP67 ABS and polycarbonate range, the 1590Z IP66 heavy duty die-cast aluminium family and the 1590ZGRP IP65 glass reinforced polyester range. The kits enable a total of 93 different sizes and styles across the three families to be pole mounted. Each kit consists of two brackets, two clamps and mounting hardware, all in stainless steel.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Optional inner panels for IP68/66 plastic enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s 1557 family has proved to be very popular since it was launched some two years ago and is increasingly being used as a housing for electromechanical components as well as PCB-mounted ...

Read more...
Outdoor housings for space-critical applications
Phoenix Contact Enclosures, Racks, Cabinets & Panel Products
New outdoor housings with an installation depth of 80 mm extend the portfolio of the ECS range of outdoor housings from Phoenix Contact. The smaller design allows device dimensions that are 75% more ...

Read more...
General-purpose plastic enclosures
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue-and-groove sealing ...

Read more...
Handheld plastic electronic instrument enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s 1552-Series handheld enclosures are available in six sizes. All models are 50 mm wide and either 22 or 30 mm high, with three length options available: 70 mm, 110 mm and 150 mm. The ...

Read more...
No need for custom enclosures thanks to rugged subrack system
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
The KM6-HD subrack range from Verotec meets the requirements of IEEE 1101.10 and 11, which expand on IEC60297 to add functionality required for modern industrial computing applications. This includes ...

Read more...
New EC centrifugal fans for more power and efficiency
Ebmpapst South Africa Enclosures, Racks, Cabinets & Panel Products
Ventilation and air conditioning fans are constantly being developed, as users’ demand for control options and energy efficiency in particular are increasing rapidly. Legal requirements, increasing awareness ...

Read more...
Small rectangular plastic enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Owing to its versatility, Hammond Manufacturing’s 1591 family is the company’s best-selling plastic enclosure range, with a wide choice of sizes and features. The 1591 family is available in five small ...

Read more...
Outdoor housings for space-critical applications
Phoenix Contact Enclosures, Racks, Cabinets & Panel Products
New outdoor housings with an installation depth of 80 mm extend the ECS range of outdoor housings from Phoenix Contact. The smaller design allows device dimensions that are 75% more compact. It is therefore ...

Read more...
Plastic electronics housings made to custom specs
Enclosures, Racks, Cabinets & Panel Products
Based in Pretoria, NewElec boasts production capabilities that are ideally suited for making customised plastic electronic housings using computer-controlled manufacturing equipment. The process is quick, ...

Read more...
Locally made, price-competitive SMC enclosures
Allbro Enclosures, Racks, Cabinets & Panel Products
The majority of electrical enclosures used in South Africa are coated with mild steel. Standard off-the-shelf sizes used to be locally manufactured but the tide of low-cost imported steel products has ...

Read more...