|
|
|
IP rated coaxial PCB connectors
31 January 2018, Interconnection
New to Gradconn’s Nautilus waterproof coaxial range, PCB mount connector versions have been added with IP67 and IP68 protection from moisture and particle ingress - when mated and unmated. The SMA connectors are available in normal polarity and reverse polarity.
Nautilus waterproof coaxial connectors in an enclosure feature an internal seal and O-ring which prevents ingress of water and particles through both the inner contact and through the panel. The accompanying diagram shows an example of a through-panel ingress problem and SMA PCB connector IP67/IP68 solution versus the Nautilus solution.
Nautilus coaxial connectors are tested to the following exacting specifications:
• IP 6x dust tight – no particle ingress.
• IP x7 waterproof for 30 minutes up to 1 metre underwater.
• IP x8 waterproof for 48 hours at 1 metre underwater.
• IP x8 waterproof for 12 hours at 5 metres underwater.
• Pressure test – 1 bar or 14,5 psi for 10 seconds.
IP6x and IPx7 test documentation is available, as well as IPx8 and pressure test documentation and test videos. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Compression lugs and splices
26 June 2019, TRX Electronics, Interconnection
Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications.
The connectors are designed for use with many different code and flex conductor ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Pin strips for KNX applications
26 June 2019, Wiltron Agencies, Interconnection
The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
- High-speed M12 connectors for transportation
29 May 2019, Webb Industries, Interconnection
Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
- Board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm.
The Fine Pitch series ...
- Durable board-to-board connector
29 May 2019, Otto Marketing, Interconnection
Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain.
While ...
- Coax-to-PCB connectors
29 May 2019, TRX Electronics, Interconnection
Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
- Wire-/board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
- Choosing the right connector for harsh environments
30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
- Connectors 101 for lighting designers
30 April 2019, Avnet South Africa, Interconnection
Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.
- ERNI hands over D-Sub production
30 April 2019, Actum Electronics, Interconnection
ERNI has discontinued its D-Sub connector portfolio and partnered with Provertha, which will now be manufacturing and selling the D-Sub product portfolio into key markets.
Rudolf Hausladen, group CEO ...
- Floating board-to-board connectors
30 April 2019, Avnet South Africa, Interconnection
Molex launched the SlimStack 0,40 mm floating board-to-board connectors, designed to save space and allow for design flexibility. These new connectors are one of the smallest of their kind in the market, ...
|
|
