|
|
19” rack mount and standalone power distribution strips
21 March 2018, Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has extended its power distribution offering with an additional 12 variants of rack mounting and stand-alone 100 – 240 V a.c., 50/60 Hz, 10 A power strips, designed for use with IEC power cords. The new units further extend Hammond’s comprehensive range of 19” rack accessories such as thermal management products, power distribution units, shelves, panels, cable management, ground kits, feet and castors.
For enhanced safety, two 10 A resettable circuit breakers prevent overloading, and both types are available with either a double-pole single-throw green illuminated on/off switch or as a basic unswitched version with a green power-on indicator light. All are fitted with an IEC320 C14 inlet plug and multiple IEC320 C13 outlet sockets, making them suitable for use anywhere.
The 1U rack mount units offer eight front- or rear-facing outlet sockets. The standalone versions are available with four, five, six or eight top-mounted outlets. The 1U rack mount units are housed in a black powder coated steel enclosure, and the standalone versions in an extruded aluminium case with a black powder coated steel cover. All versions are TUV, cULus and CAN/CSA certified to IEC 60950-1 and are CE compliant to the EU low voltage directive 2014/35/EU. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Ventilated sensor enclosures
27 March 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
The new 1551V miniature ventilated sensor enclosures from Hammond Manufacturing are designed to house sensors and small sub-systems installed in the manufacturing environment as part of IoT (Internet ...
- Electronics housings for harsh environments
27 March 2019, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
Phoenix Contact has introduced new electronics housings for especially harsh ambient conditions. The robust housings of the ECS series, with IP69 degree of protection, are suited for a broad temperature ...
- Extruded aluminium enclosures
27 March 2019, Sivan Electronic Supplies, Enclosures, Racks, Cabinets & Panel Products
The extruded aluminium enclosures of Gainta’s ALUG7XX series are available in different sizes, with lengths suitable for indoor desktop device or outdoor wall-mounting junction/control box use.
Five ...
- Enclosure front-panel customisation service
27 March 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
Pentair offers a wide choice of front panels and plug-in units for all kinds of electronics applications, and complements this with Front Panel Express, a rapid customisation service for all 19” and standard ...
- Rack-mount and desktop 19” enclosures
30 January 2019, Communica, Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced 4U high versions and added extended 559 mm depths to all heights of its RM family of 1U to 4U 19” rack-mounting and desktop enclosures. 1U to 3U half-width versions ...
- Extruded aluminium enclosures
30 January 2019, Sivan Electronic Supplies, Enclosures, Racks, Cabinets & Panel Products
Gainta’s ALUG7XX range of extruded aluminium enclosures encompasses different sizes, with suitable lengths for indoor desktop devices or outdoor wall-mounting junction/control box use.
They come in five ...
- Modular electronics housings
14 November 2018, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
Phoenix Contact introduced a range of modular electronics housings specially designed for the IoT devices of tomorrow. The ICS (Industrial Case System) housings are available in graduated sizes, and with ...
- Sealed polycarbonate and ABS enclosures
14 November 2018, Communica, Enclosures, Racks, Cabinets & Panel Products
Optimised for use in harsh industrial environments, the 1554 flat lid and 1555 styled lid ranges of ABS and UV stabilised polycarbonate enclosures from Hammond Manufacturing provide IP66 sealing and good ...
- Electronic housings with standardised interfaces
12 September 2018, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
High-performing, easily adaptable and highly available – for quite some time now embedded systems have been more than just invisible mini-computers.
In decentralised automation structures, they fulfil ...
- Concealed wall mounting for Synergy enclosures
12 September 2018, Avnet South Africa, Enclosures, Racks, Cabinets & Panel Products
OKW’s Synergy enclosures can now be wall mounted using a new concealed suspension element.
This new suspension element is compatible with the circular R120 (12 cm diameter) and R140 (14 cm diameter) ...
- A home for the Raspberry Pi
18 July 2018, Computer/Embedded Technology, Enclosures, Racks, Cabinets & Panel Products
The Raspberry Pi has exceeded many of its creators’ expectations. Many amateur developers use the miniature computer to automate processes within their own home, for example. At the same time, a growing ...
- Body-worn enclosures
13 June 2018, Avnet South Africa, Enclosures, Racks, Cabinets & Panel Products
The wearable enclosure Body-Case range by OKW has been extended by a smaller size. In addition, a cradle is also available now to hold the enclosure safely or, if necessary, to be able to charge the system ...
|
|
