mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Magnetometer and eCompass
12 September 2018, Analogue, Mixed Signal, LSI

With industrial-grade longevity that assures availability for 10 years, the STMicroelectronics IIS2MDC magnetometer and ISM303DAC eCompass enable both reliable, low-power tamper detection for smart meters and precision motion and distance sensing in applications from industrial automation and robotics to smart buildings, smart security and medical devices.

Both sensors contain an AMR (anisotropic magneto-resistive) magnetometer with high dynamic range of ±50 Gauss, which meets best-in-class benchmarks for resolution and low power consumption. Each also features an integrated temperature sensor, and provides a 16-bit digital output via a built-in I²C/SPI serial interface.

The ISM303DAC’s additional integrated low-noise 3-axis accelerometer with user selectable full-scale range up to ±16 G enables dual-mode magnetic/physical tamper detection. It also serves applications such as antenna pointing, positioning and navigation, robot guidance, and general industrial motion tracking or distance sensing. The magnetic and accelerometer blocks can be powered down independently to maximise energy savings.

Both devices can be configured to generate an interrupt signal for magnetic-field detection and automatically compensate for hard-iron offsets provided from the higher application layer. Additionally, the ISM303DAC can also generate interrupts upon recognition of freefall events, tap and double-tap, activity or inactivity, 6D-orientation thresholds, and wakeup events. A built-in FIFO stores accelerometer data to minimise main processor intervention and, as a result, reduce system power consumption.

Development support includes drivers for both sensors, and software examples including tilt-compensated electronic compass, dynamic magnetometer calibration, and 6-axis or 9-axis sensor fusion. The STEVAL-MKI185V1 adaptor board for the IIS2MDC and STEVAL-MKI184V1 for the ISM303DAC are also available, ready to plug into a standard DIL24 socket on a motherboard such as the STEVAL-MKI109V3 professional MEMS board to assist development using ST’s Unico GUI.

For more information contact EBV Electrolink, +27 21 402 1940, capetown@ebv.com, www.ebv.com


Credit(s)
Supplied By: EBV Electrolink
Tel: +27 11 236 1900
Fax: +27 11 236 1913
Email: saro.murabito@ebv.com
www: www.ebv.com
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Time-to-digital converter
    29 May 2019, Future Electronics, Analogue, Mixed Signal, LSI
    ams has introduced the AS6500, a new high-resolution time-to-digital converter (TDC) featuring CMOS inputs and compact packaging for use in space- and cost-constrained applications. It can measure time ...
  • Miniaturised CO2 sensor
    29 May 2019, Electrocomp, Analogue, Mixed Signal, LSI
    Thanks to new energy standards and better insulation, buildings have become increasingly energy efficient, but at the cost of accelerated deterioration in air quality. Since high CO2 levels compromise ...
  • MCUs for advanced security and physical protection
    29 May 2019, EBV Electrolink, DSP, Micros & Memory
    The new K32 microcontroller (MCU) series from NXP Semiconductors is optimised for energy efficiency in real-time embedded applications, and enables advanced security with physical tamper protection in ...
  • MCUs with water-tolerant touch integration
    29 May 2019, EBV Electrolink, DSP, Micros & Memory
    The 5 V KE1xZ family of microcontrollers (MCU), made by NXP Semiconductor and based on the Arm Cortex M0+, enables embedded control systems in harsh electrical environments, with an integrated CAN controller, ...
  • Phase-locked oscillator
    30 April 2019, Accutronics, Analogue, Mixed Signal, LSI
    L3 Narda-MITEQ released a new cost-effective phase-locked oscillator with an extended frequency range. The 2LPL series comes in a 51 x 51 x 15 mm housing, has an operating temperature from -40°C to + ...
  • Microwave up- and down-converter
    30 April 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT, Analogue, Mixed Signal, LSI
    Analog Devices’ ADMV1013 and ADMV1014 are a paired microwave up- and down-converter, respectively. They operate over a very wide frequency range with 50 Ω matching from 24 GHz up to 44 GHz, facilitating ...
  • Isolated amplifiers
    30 April 2019, NuVision Electronics, Analogue, Mixed Signal, LSI
    Silicon Labs has introduced a family of isolated analog amplifiers, voltage sensors and delta-sigma modulator (DSM) devices designed to provide accurate current and voltage measurement with very low drift ...
  • PoE chipset for PDs
    30 April 2019, EBV Electrolink, Power Electronics / Power Management
    A new chipset from STMicroelectronics lets users quickly build reliable and space-efficient Powered Devices (PDs) to take advantage of the latest IEEE 802.3bt Power-over-Ethernet (PoE) specification. ...
  • ON launches new IGBT gate drivers
    30 April 2019, EBV Electrolink, Power Electronics / Power Management
    ON Semiconductor launched a new silicon-carbide (SiC)-based hybrid IGBT and associated isolated high-current IGBT gate driver at the PCIM Europe 2019 Exhibition and Conference in Nuremberg. The AFGHL50T65SQDC ...
  • BAW-based chips for comms infrastructure
    30 April 2019, Avnet South Africa, Analogue, Mixed Signal, LSI
    Texas Instruments débuted new bulk acoustic wave (BAW)-based embedded processing and analog chips for the next generation of connectivity and communications infrastructure. Communications and industrial ...
  • Miniaturised CO2 sensor
    30 April 2019, Electrocomp, Analogue, Mixed Signal, LSI
    Thanks to new energy standards and better insulation, buildings have become increasingly energy efficient, but at the cost of accelerated deterioration in air quality. Since high CO2 levels compromise ...
  • MCUs with water-tolerant touch integration
    30 April 2019, EBV Electrolink, DSP, Micros & Memory
    The 5 V KE1xZ family of microcontrollers (MCU), made by NXP Semiconductor and based on the Arm Cortex M0+, enables embedded control systems in harsh electrical environments, with an integrated CAN controller, ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.