|
|
Sealed polycarbonate and ABS enclosures
14 November 2018, Enclosures, Racks, Cabinets & Panel Products
Optimised for use in harsh industrial environments, the 1554 flat lid and 1555 styled lid ranges of ABS and UV stabilised polycarbonate enclosures from Hammond Manufacturing provide IP66 sealing and good mechanical protection.
The light grey RAL 7035 enclosures are designed to house printed circuit boards or DIN rail mounted components. IP66 sealing is achieved through a one-piece silicone gasket in a tongue and groove seal. 23 sizes from 66 x 66 x 41 mm to 239 x 160 x 119 mm are available with flat and styled self-coloured, clear and translucent lids. Flanged lids for 10 sizes, from 119 x 66 x 42 mm to 180 x 119 x 62 mm, provide increased security by preventing access to the interior without removing the enclosure from the surface to which it is attached.
The styled lids include a recess suitable for mounting a membrane keyboard and are also fitted with PCB mounting bosses. Bases are fitted with internal DIN rail mounting tabs in all but two sizes, and standoffs for mounting PCBs or optional internal panels are provided in all versions.
To avoid any possible corrosion problems, the base inserts and self-captivating lid screws are both stainless steel, located outside the gasket; additional holes in the base, again outside the gasket seal, are provided to allow the enclosure to be wall- or shelf-mounted. An optional foot kit is also available.
Optional steel panels suitable for mounting heavy components can be fitted to the integral mounting points in the base; the bases also feature moulded slots to enable 1,6 mm thick PCBs to be mounted vertically into the enclosure.
For more information contact Communica, +27 (0)12 657 3500, sales@communica.co.za, www.communica.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Verotec VMEbus hardware chosen for anti-tank system
29 May 2019, Vepac Electronics, Enclosures, Racks, Cabinets & Panel Products
Verotec has been selected by a top 10 global defence contractor to supply seven different variants of VMEbus system hardware, backplanes and PSU sub-systems for a land-based US anti-tank system.
The ...
- Ventilated sensor enclosures
27 March 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
The new 1551V miniature ventilated sensor enclosures from Hammond Manufacturing are designed to house sensors and small sub-systems installed in the manufacturing environment as part of IoT (Internet ...
- Electronics housings for harsh environments
27 March 2019, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
Phoenix Contact has introduced new electronics housings for especially harsh ambient conditions. The robust housings of the ECS series, with IP69 degree of protection, are suited for a broad temperature ...
- Extruded aluminium enclosures
27 March 2019, Sivan Electronic Supplies, Enclosures, Racks, Cabinets & Panel Products
The extruded aluminium enclosures of Gainta’s ALUG7XX series are available in different sizes, with lengths suitable for indoor desktop device or outdoor wall-mounting junction/control box use.
Five ...
- Enclosure front-panel customisation service
27 March 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
Pentair offers a wide choice of front panels and plug-in units for all kinds of electronics applications, and complements this with Front Panel Express, a rapid customisation service for all 19” and standard ...
- Rack-mount and desktop 19” enclosures
30 January 2019, Communica, Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced 4U high versions and added extended 559 mm depths to all heights of its RM family of 1U to 4U 19” rack-mounting and desktop enclosures. 1U to 3U half-width versions ...
- Extruded aluminium enclosures
30 January 2019, Sivan Electronic Supplies, Enclosures, Racks, Cabinets & Panel Products
Gainta’s ALUG7XX range of extruded aluminium enclosures encompasses different sizes, with suitable lengths for indoor desktop devices or outdoor wall-mounting junction/control box use.
They come in five ...
- Modular electronics housings
14 November 2018, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
Phoenix Contact introduced a range of modular electronics housings specially designed for the IoT devices of tomorrow. The ICS (Industrial Case System) housings are available in graduated sizes, and with ...
- Electronic housings with standardised interfaces
12 September 2018, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
High-performing, easily adaptable and highly available – for quite some time now embedded systems have been more than just invisible mini-computers.
In decentralised automation structures, they fulfil ...
- Concealed wall mounting for Synergy enclosures
12 September 2018, Avnet South Africa, Enclosures, Racks, Cabinets & Panel Products
OKW’s Synergy enclosures can now be wall mounted using a new concealed suspension element.
This new suspension element is compatible with the circular R120 (12 cm diameter) and R140 (14 cm diameter) ...
- A home for the Raspberry Pi
18 July 2018, Computer/Embedded Technology, Enclosures, Racks, Cabinets & Panel Products
The Raspberry Pi has exceeded many of its creators’ expectations. Many amateur developers use the miniature computer to automate processes within their own home, for example. At the same time, a growing ...
- Body-worn enclosures
13 June 2018, Avnet South Africa, Enclosures, Racks, Cabinets & Panel Products
The wearable enclosure Body-Case range by OKW has been extended by a smaller size. In addition, a cradle is also available now to hold the enclosure safely or, if necessary, to be able to charge the system ...
|
|
