|
|
Ventilated sensor enclosures
27 March 2019, Enclosures, Racks, Cabinets & Panel Products
The new 1551V miniature ventilated sensor enclosures from Hammond Manufacturing are designed to house sensors and small sub-systems installed in the manufacturing environment as part of IoT (Internet of Things) systems.
While there is no relevant international standard, the 1551V enclosures are designed around the PCB (printed circuit board) sizes selected by leading sensor manufacturers for their latest generations of products.
The ABS UL94-HB 1551V is available in black, grey and white as standard, and in four plan sizes: 80 x 80 mm, 80 x 40 mm, 60 x 60 mm and 40 x 40 mm, each 20 mm high. Maximum PCB sizes are 74 x 74 mm, 74 x 34 mm, 54 x 54 mm and 34 x 34 mm, respectively.
Four PCB mounts are moulded into the base and the 20 mm height gives enough space for board-mounted RJ45, USB and other standard communication interfaces. To simplify access, the snap-fit closure allows repeated opening and closing without tools. There are ventilation slots on all four vertical faces, and mounting slots and a 15 mm cable knock-out in the base.
Environmental sensors monitoring basics such as temperature, humidity and pressure are widely installed, and are now increasingly intelligent sub-systems, with data processing and communications capability embedded on a small PCB. For active components that produce relatively large amounts of waste heat, the 1551V provides excellent airflow for cooling purposes. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Is the supply chain broken?
30 April 2019, Electrocomp, Diel Met Systems, ExecuKit, NuVision Electronics, RF Design, News
The world’s insatiable demand for electronic goods has created a monster: a supply chain that spans the globe and relies on the entirety of our collective knowledge and experience in the pursuit of industry.
- Hybrid over-voltage protectors
30 April 2019, Electrocomp, Circuit & System Protection
The brand new GMOV line of over-voltage protection components from Bourns combines the company’s patented, space-saving FLAT gas discharge tube (GDT) technology with a metal oxide varistor (MOV) to create ...
- Stacked patch antenna for GNSS
30 April 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
Molex’s high-accuracy stacked patch GNSS (global navigation satellite system) antenna features a 50 Ω impedance rating, 2 W RF power rating, and below -10 dB return loss. It offers optimised signal processing ...
- Rugged AC filter capacitors
30 April 2019, Electrocomp, Passive Components
TDK has introduced a new series of AC filter capacitors that are UL 810 approved at the component level and carry the CE mark. The capacitors of the B32354S3* series are designed for a rated voltage of ...
- Miniaturised CO2 sensor
30 April 2019, Electrocomp, Analogue, Mixed Signal, LSI
Thanks to new energy standards and better insulation, buildings have become increasingly energy efficient, but at the cost of accelerated deterioration in air quality. Since high CO2 levels compromise ...
- Electronics housings for harsh environments
27 March 2019, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
Phoenix Contact has introduced new electronics housings for especially harsh ambient conditions. The robust housings of the ECS series, with IP69 degree of protection, are suited for a broad temperature ...
- Extruded aluminium enclosures
27 March 2019, Sivan Electronic Supplies, Enclosures, Racks, Cabinets & Panel Products
The extruded aluminium enclosures of Gainta’s ALUG7XX series are available in different sizes, with lengths suitable for indoor desktop device or outdoor wall-mounting junction/control box use.
Five ...
- Enclosure front-panel customisation service
27 March 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
Pentair offers a wide choice of front panels and plug-in units for all kinds of electronics applications, and complements this with Front Panel Express, a rapid customisation service for all 19” and standard ...
- Fast-acting and time-lag SMD fuses
27 March 2019, Electrocomp, Circuit & System Protection
Bourns announced the introduction of three new families of fast-acting, fast-acting/low-voltage, and time-lag SMD fuses to complement its line of SinglFuse SMD fuse products.
The new SF-3812FG-T and ...
- Automotive TVS diode
27 March 2019, Electrocomp, Circuit & System Protection
Bourns announced the release of the new Model SM8SF-Q transient voltage suppressor (TVS) diode series. This series is AEC-Q101 compliant and well suited for protecting sensitive electronics against voltage ...
- High-current SMD fuses
27 March 2019, Electrocomp, Circuit & System Protection
Bourns introduced two new families of high-current and ultra high-current SinglFuse SMD fuses. The new Model SF-2923HC-C and Model SF-2923UC-C fuse families utilise a robust ceramic cube housing with ...
- Resettable thermal cutoff devices
27 March 2019, Electrocomp, Circuit & System Protection
The SC series of miniature resettable thermal cutoff (TCO) devices is Bourns' new generation of surface-mount, miniature resettable thermal cutoff devices, following the established SA series.
Miniature ...
|
|
