|
|
Conduction cooled AC-DC power module
27 March 2019, Power Electronics / Power Management
Rated at 504 W, the baseplate conduction-cooled PFH500F-28 from TDK-Lambda is packaged in a compact 101,6 x 61 mm footprint. Using industry standard PMBus commands, the output voltage and fault management levels can be adjusted (read/write) and product status read back. The PFH500F series is optimised for COTS (commercial-off-the-shelf), LED signage, communications, broadcast, test and measurement equipment.
The PFH500F-28 has an operating efficiency of up to 92%, enabled through the use of the latest technology. This includes GaN semiconductors, bridgeless power factor correction with synchronous rectification and digital control. A digital isolator replaces the traditional optocoupler for long-term stability and reliability.
Operating from a wide-range 85 to 265 V a.c. input, the module will deliver 18 A at 28 V with an adjustment capability of 22,4 – 33,6 V via the trim pin or the PMBus.
It has a baseplate temperature range of -40°C to +100°C and measures 101,6 x 61 x 13,5 mm (L x W x H).
Product features and options include: droop mode current share, a 12 V auxiliary standby output, remote on/off, remote sense, an open collector ‘power good’ signal, output trim and PMBus communication. The PMBus can be used to program the output voltage, activate the remote on/off, change the under/over-voltage, over-current and over-temperature set points, plus read back input and output current, input voltage and internal temperature.
Input to output isolation is 3 000 V a.c., input to case is 2 500 V a.c. and output to case is 1 500 V d.c. Safety certification is to IEC/EN/UL 60950-1 standards with CE marking for the Low Voltage and RoHS2 directives.
For more information contact Tobie Muller, Accutronics, +27 11 782 8728, tmuller@accutronics.co.za, www.accutronics.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Compact motor starter with full protection
27 March 2019, Vepac Electronics, Power Electronics / Power Management
The new Christian P-4.0 motor starter from TELE is designed for motors up to 4,0 kW at 400 V, and includes five functions in one compact unit, requiring only 22,5 mm width.
It offers a soft start, soft ...
- Rack mounted power supplies
27 March 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has introduced a series of rack-mount, high-voltage DC power supplies able to supply up to 60 kV.
Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature flexible embedded ...
- DIN-rail power supplies
27 March 2019, Conical Technologies, Power Electronics / Power Management
Traco Power’s new TIB series of DIN-rail power supplies combines efficient circuit topology with optimised cost/performance ratio for industrial environments and for electrical control cabinets.
The ...
- DIN-rail redundancy module
27 March 2019, Accutronics, Power Electronics / Power Management
TDK announced the introduction of the DRM40 series of DIN-rail mounted redundancy modules. Two 10 V to 30 V d.c. inputs are rated at 20 A each and the output at 40 A. A 150% peak load capability for four ...
- PMBus quarter-brick converters
27 March 2019, Altron Arrow, Power Electronics / Power Management
Murata has launched a series of 600 W, DOSA compliant, 12 V output, digital quarter-brick DC-DC converters from Murata Power Solutions.
The series was designed for high-reliability applications based ...
- 15 Watt DC-DC converter
27 March 2019, Conical Technologies, Power Electronics / Power Management
The THL 15WI series is Traco Power’s latest addition to the existing 15 Watt DC-DC converter range.
The series comes in an encapsulated, shielded 2,54 x 2,54 x 1,016 cm metal package and has a fully ...
- Phase-locked oscillator
27 March 2019, Accutronics, Analogue, Mixed Signal, LSI
L3 Narda-MITEQ released a new cost-effective phase-locked oscillator with an extended frequency range. The 2LPL series comes in a 51 x 51 x 15 mm housing, has an operating temperature from -40°C to + ...
- Tips for resolving common battery faults
27 March 2019, Forbatt SA, Power Electronics / Power Management
Forbatt SA not only provides high-quality batteries but advises on maintaining batteries and prolonging their lifespan. The following is a quick guide for how to spot and resolve common battery faults ...
- PoE chipset for PDs
27 March 2019, EBV Electrolink, Power Electronics / Power Management
A new chipset from STMicroelectronics lets users quickly build reliable and space-efficient Powered Devices (PDs) to take advantage of the latest IEEE 802.3bt Power-over-Ethernet (PoE) specification. ...
- 15 Watt DC-DC converter
27 March 2019, Conical Technologies, Power Electronics / Power Management
The THL 15WI series is Traco Power’s latest addition to the existing 15 Watt DC-DC converter range.
The series comes in an encapsulated, shielded 2,54 x 2,54 x 1,016 cm metal package and has a fully ...
- 300 W PSU for medical electronics
27 March 2019, Sivan Electronic Supplies, Power Electronics / Power Management
Cosel’s GMA300 AC-DC power supply provides up to 300 W in a package measuring 5,08 x 10,16 cm and 1U high. Fully compliant with IEC60601-1 3rd and 4th editions, as well as BF rated, it has a leakage current ...
- Harvesting kinetic energy to power smart objects
27 February 2019, Avnet South Africa, This Week's Editor's Pick, Power Electronics / Power Management
As the world becomes increasingly smart and connected, batteries are not always the right choice in some of the emerging use cases.
|
|
