NXP Semiconductors’ MC56F83xxx digital signal controllers (DSC) family offers peripheral enhancements ideal for high-performance digital power conversion and advanced motor control applications.
The MC56F83xxx DSC family comprises NXP’s performance-level DSCs, extending their feature integration to include support for dual partition Flash, Flash ECC, USB FS OTG, CAN FD and boot ROM. In addition, they offer enhanced DMA function (eDMA), inter-module crossbar (XBAR) with more flexible event generator (EVTG), low-power, high-speed analog-to-digital converters, extended RAM size and up to 16 channels of high-resolution PWM.
The devices have one USB FS/LS 2.0 OTG controller supporting crystal-less operation, and one FlexCAN module supporting CAN FD and CAN 2.0 B protocol, enabling real-time and cost-effective field communication. They are powered by a 32-bit DSP core, with both core and bus speeds up to 100 MHz.
Target applications include digital power application, including switched mode power supply (SMPS), uninterruptible power supply (UPS), photovoltaic systems and power distribution systems; as well as motor control applications, including industrial motor, appliance motor and general single/dual motor control (PMSM, BLDC, SR, stepper).
Advanced pressure monitoring sensor EBV Electrolink
Test & Measurement
The Infineon KP497 is an advanced, highly integrated digital pressure sensor designed for demanding automotive and industrial applications, with a particular focus on battery management systems.
Read more...High-efficiency 600 V power MOSFET EBV Electrolink
Power Electronics / Power Management
The Infineon Technologies 600 V CoolMOS CFD7 is a high-voltage, super-junction N-channel MOSFET technology designed to deliver outstanding efficiency and robust switching performance.
Read more...Quad RF ADC/DAC for wideband transceiver design Altron Arrow
DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.
Read more...High-performance FPGA family EBV Electrolink
DSP, Micros & Memory
AMD’s Kintex UltraScale+ FPGA family delivers high-performance, mid-range field programmable gate arrays that balance price, performance, and power efficiency for demanding DSP applications.
Read more...Compact and scalable development board
DSP, Micros & Memory
The FRDM-MCXW72 from NXP is a compact and scalable development board for rapid prototyping of the MCX W72 multiprotocol wireless MCU.
Read more...High-performance processing for cost-aware industrial IoT Altron Arrow
DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.
Read more...Development board for secure industrial and IoT applications
DSP, Micros & Memory
The FRDM-i.MX93 Development Board from NXP is a compact, entry-level platform built around the powerful i.MX 93 applications processor, designed to accelerate prototyping and development for industrial, IoT, and edge computing applications.
Read more...KIOXIA pioneer new 3D Flash technology EBV Electrolink
DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.
Read more...Ultra-wide signal capture from a single chip RFiber Solutions
DSP, Micros & Memory
Jariet Technologies developed Electra, a chipset that enables ultra-wide, multi-function and multi-band signal capture and generation from a single component.
Read more...High-performance processing at the edge Altron Arrow
DSP, Micros & Memory
STMicroelectronics’ STM32MP23 microprocessor is designed to meet the demands of industrial, IoT, and edge AI applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version