ELU offers a wide range of 5x20 mm and 6x32 mm glass and ceramic fuses with international approvals such as SEMKO, VDE, SEV, BEAB, IMQ, UL and CSA. The company also has fuseholders for many different applications.
ELU sub-miniature (IEC 127-3-3 and IEC 127-3-4) fuses, for use at rated voltages of 250 V have a rupturing capacity of 35 A a.c. or 10 X In. The small housing (8,4 mm diameter) has two radial terminations (pin spacing 5,8 mm) for direct soldering to PCBs, alternatively they may be used with a socket type 166602 for ease of fuse replacement.
This component is available in F, M and T versions approved by SEMKO and VDE. A special design is UL and CSA (125 V) approved. Rupturing capacity is 50 A. Three versions meet all customer's requirements - short terminations (4,3 mm), long terminations (18,8 mm) and long terminations on tape/ammopack for automatic insertion.
Important advantages are: smallest dimension for 250 V; direct soldering to PCBs; suitable for socket connection; available on tape for automatic insertion; approved by SEMKO/VDE and UL/CSA.
Clearing the Static: Electrostatic Discharge Actum
Manufacturing / Production Technology, Hardware & Services
A cordless ESD (Electrostatic Discharge) wrist strap does not work by grounding the person in the same way as a traditional wired wrist strap. Instead, it works by reducing or balancing the static charge on your body so that you are less likely to discharge electricity into sensitive electronic components.
Read more...EMC limits and levels Altron Arrow
Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.
Read more...Safety relay for explosive areas IOT Electronics
Circuit & System Protection
Phoenix Contact has expanded its safety portfolio with the new PSR-MC35-EXI safety relay module, specifically engineered for use in potentially explosive environments.
Read more...Clearing the Static: Ensuring effective ESD control Actum
Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.
Read more...Clearing the Static: The importance of ESD audits Actum
Circuit & System Protection
An ESD audit is the first step in establishing an effective static control programme in the workplace, and will help identify vulnerable areas and potentially hazardous static zones that require improvement.
Read more...EMI shielding materials application guide
Circuit & System Protection
TE Connectivity’s shielding solutions include electrically conductive elastomers, gaskets, knitted wire mesh, oriented wire, EMI shielding ventilation panels, shielded window, cable shielding and shielding components.
Read more...Clearing the Static: ESD containers and packaging Actum
Circuit & System Protection Vacuum forming ESD
Electronic components can be damaged by electrostatic discharges. To protect against such damage, electronic assembly parts are often transported or stored in vacuum formed component ...
Read more...Antistatic vinyl flooring Actum
Manufacturing / Production Technology, Hardware & Services
Vinyl is an affordable, antistatic tile or sheet with a life-span greater than 10 years and installed as a permanent electrostatic discharge floor.
Read more...Electrostatic discharge chairs Actum
Circuit & System Protection
An ESD chair forms an integral part of grounding within the electrostatic discharge protected area to prevent potential damage to products.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version