The MAX1191 is an ultra-low-power, dual, 8-bit, 7,5 Msps analog-to-digital converter from Maxim that features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440 MHz bandwidth and accept fully differential or single-ended signals. The MAX1191 delivers a typical signal-to-noise and distortion (SINAD) of 48,6 dB at an input frequency of 1,875 MHz and a sampling rate of 7,5 Msps while consuming only 12 mW.
This ADC operates from a 2,7 V to 3,6 V analog power supply. A separate 1,8 V to 3,6 V supply powers the digital output driver for flexible interfacing to different logic levels. In addition to ultra-low operating power, the device features three power-down modes to conserve power during idle periods. An internal 1,024 V precision bandgap reference sets the full-scale range of the ADC to ±0,512 V. A flexible reference structure allows the MAX1191 to use its internal reference or accept an externally applied reference for applications that require increased accuracy.
The MAX1191 features parallel, multiplexed, CMOS-compatible tri-state outputs. The digital output format is offset binary. With superior dynamic performance, ultra-low power, and small size, the MAX1191 is ideal for applications in imaging, instrumentation, and digital communications. It is available in a 28-pin thin QFN package, specified for -40 to +85°C.
IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.
Read more...Precision JFET op-amp Altron Arrow
Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...Dual-channel ADC for RF applications RFiber Solutions
Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.
printer friendly version