For use in areas with an explosion risk in Zone 2, Phoenix Contact presents two compact Quint Power power supplies and a Quint Diode redundancy model with type 'n' explosion protection (EN 50021). The explosion protection type 'n', conceived for use of operating materials in Zone 2, incorporates established industrial standards that are adapted to the specific features of explosive gases.
The power supplies have a regulated and adjustable output voltage of 22,5-28,5 V with an output current of 5 A and 10 A. Consistent implementation of a wide input range from 85-264 V a.c. or 90-250 V d.c. ensures operation on all standard power grids worldwide. A potential-free relay contact and an active transistor switching output provide preventive function monitoring. To achieve 100% redundancy, the power supplies can be connected in parallel using the redundancy module.
An international certification package including the ATEX guideline with norm EN 50021 and the UL standards for Class 1, Division 2, which are particularly important for areas with explosive substances, enables use worldwide. Quint Power also fulfils the requirements of the CB scheme, Germanischer Lloyd as well as UL 60 950 for information technology installations and UL 508 for industrial control installations.
For more information contact Duncan Venter, Phoenix Contact, 011 793 7121, [email protected]
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Cellular routers for explosive areas Phoenix Contact
Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version