mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

2 mm hard metric connector system
28 January 2004, Interconnection

Connections should have the same signal and transmission characteristics as the internal system data cables. Data should be transmitted with as few errors as possible, without time delay, signal loss, mutual influences or other electro-magnetic interference. The Erni Ermet connectors come close to this ideal because of their constant geometrical proportions and cable cross-sections as well as the pseudo-coax arrangements of the signal and ground pins.

The design is based on extensive measuring programs for the characteristics of the widest variety of connector systems conducted in the pico-second range and with frequency spectra of up to 20 GHz. These measuring results are the basis for simulation models which allow the characteristics of the connectors to be determined early in the design phase. As a result, development times can be reduced and systems can be better adapted to the requirements of customers. Full details are available in the Erni brochure available from the distributor.


Credit(s)
Supplied By: Actum Electronics
Tel: +27 11 608 3001
Fax: +27 11 608 1918
Email: sales@actum.co.za
www: www.actum.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • RF coaxial IDC connectors
    28 August 2019, Future Electronics, Interconnection
    AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
  • Sealed plastic connectors
    28 August 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Digital workflow eases selection of Schroff products
    28 August 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
    nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...
  • Balancing performance, speed and cost for rugged interconnects
    25 September 2019, Avnet South Africa, Interconnection
    System designers want the smallest and lightest possible connectors for use in aerospace and military electronics, while industrial and transportation electronics are expected to deal with the same harsh environments at more competitive cost points.
  • 18-slot PXI Express chassis
    25 September 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
    Schroff nVent has expanded its Schroff product range for PXI systems by adding an 18-slot Schroff PXI Express system with a modular structure which is used in complex measuring and simulation applications. The ...
  • Sealed plastic connectors
    25 September 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Connector module for 4PPoE
    25 September 2019, Webb Industries, Interconnection
    Webb Industries has introduced the new AMJ-S Module 2G from Telegärtner, optimised and redesigned to provide demanding applications with operational reliability under extreme mechanical and electrical ...
  • Waveguide to coax adaptors
    31 July 2019, RF Design, Interconnection
    Pasternack has launched a new series of waveguide to coax adapters for use in 5G, telecommunications, automotive radar, satellite communications, point-to-point radio, and terrestrial communications applications. The ...
  • SMT test points and terminal pins
    31 July 2019, Vepac Electronics, Interconnection
    Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
  • Modular fibre-optic patch panel
    31 July 2019, Webb Industries, Interconnection
    The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
  • Subrack configuration software
    31 July 2019, Actum Electronics, Design Automation
    Schroff has launched the EuropacPRO Subrack Configurator, an intelligent online design tool that enables users to configure individual EuropacPRO subracks for vertically-installed applications. This ...
  • Vent panels for increased airflow and EMI protection
    26 June 2019, Actum Electronics, Circuit & System Protection
    Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.