The increasing requirements to power supplies for electronic systems require higher power density, higher responsibility and better performance. The C20F from Schurter is an IEC 320/C20 power entry module with line filter, which is designed specifically for the mentioned requirements. The product is suitable for power supplies with power ratings up to 3500 W.
The C20F is especially designed for rated currents up to 20 A and is available as standard or as medical version for screw-on or snap-in mounting. Optionally, the product is offered with X1 capacitors for applications with increased surge withstand. The C20F is compact and from EMC-technical as well as from mounting point of view to be preferred compared to a block filter. It provides optimal protection for your application at the same time. The C20F is approved according to ENEC 16 A/250 V resp. 20 A/125, 250 V UL, CSA and designed for applications according to IEC/EN 60950.
The products are suitable for the usage in high-performance power supplies or distribution units, especially in IT-equipment, medical and measuring equipment as well as in other industrial applications.
Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.
Read more...Bulgin unveils new range of sustainable connectors Avnet Abacus
Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.
Read more...Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.
Read more...High-reliability spring-loaded interconnects Spectrum Concepts
Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.
Read more...Connectors for the Smart Factory Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...Reliable photovoltaic adapter set Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version