25 February 2004Power Electronics / Power Management
Surveillance
LEM's HTS 10-P is the smallest current transducer in its range occupying only 17 x 19 x 10,5 mm (L x W x H) on a printed circuit board. Using a unipolar power supply of 0 to +5 V, it allows bipolar current measurement of 10 A r.m.s. nominal, supplying a ratiometric voltage output. The initial offset at no primary current (Vdd/2), as well as the gain (Vdd x 20 mV/A) at +25°C are then directly dependent on the supply voltage used. With a measuring range of up to ±15 A pk, it is particularly suitable for detecting overloads.
The size, the wide operating temperature range (-40 to +85°C) and the unipolar power supply targets have been achieved by using an ASIC. The HTS 10-P is supplied with a tolerance of ±12% for the initial offset and ±30% for the gain at +25°C. When the transducer is used with a microcontroller, these tolerances can be improved. Otherwise, the HTS 10-P/SP1 version, with tolerances upgraded to ±3% and ±20%, respectively for the initial offset and for the gain at +25°C, is also available. This version also offers better thermal offset and gain drift.
The performance and low cost of the HTS 10-P series make it particularly suitable for industrial applications (compliance to the EN 50178 standard and marked CE) such as garage door openers; electric doors, gates, shutters and awnings; electric power seats. It is also suitable for low-power, low-cost drives, where the transducer can provide detection, monitoring and safety.
Surveillance & AI roundtable DeepAlert Lytehouse Refraime SMART Security Solutions Technews Publishing
Editor's Choice Surveillance Integrated Solutions AI & Data Analytics SMART Security Solutions held an online roundtable with a few surveillance experts to explore the intersection of surveillance and AI, gaining insights into the market and how control rooms are evolving.
Read more...Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Duxbury SA Milesight distributor Duxbury Networking
News & Events Surveillance
Duxbury Networking has been appointed the exclusive distributor of Milesight surveillance solutions in South Africa, expanding its surveillance portfolio with a platform designed to deliver AI-driven analytics, rapid deployment, and open integration for modern security environments.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version