Passive Components


Thick film power resistors series

24 March 2004 Passive Components

Due to a non-inductive design, Arcol's FPA Thick Film Power resistor series is ideally suited for high frequency and pulse load applications. The FPA100 series is available connected as two terminals or four terminals, in parallel or series.

Key features are: ISOTOP/SOT227 semiconductor style package; 100 W dissipation in a small footprint; very low inductance; direct heatsink mounting. Main applications can be found in variable speed drives, power supplies, control devices, telecom, robotics, motor controls, dynamic braking and other switching designs.

Offered in E24 ohmic value range, from 2 Ω to 20 MΩ, the TCR is: 50 ppm, 100 ppm, 250 ppm (at +105°C ref to +25°C). Power rating is 100-200 W at 25°C, max working voltage is 1 kV rms, and dielectric strength is 4 kV.

These resistors are rated for a working temperature range of -55 to +155°C.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PCB connectors for power systems
Phoenix Contact Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.

Read more...
Polymer caps with very high ripple current capability
RS South Africa Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.

Read more...
SPE connector range
Phoenix Contact Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.

Read more...
TDK expands MLCC series
RS South Africa Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...
Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...
Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...