The PC 6 and PCU 6 PCB plug connectors from Phoenix Contact have been specially developed for use in high-current applications. Due to highly conductive metal alloys, the plug connectors offer low contact resistance. According to the derating curve, the connectors have a current carrying capacity of 41 A per single pin at a temperature of 50°C.
Particularly for large power or temperature fluctuations, a steel upper spring on the socket side provides additional contact security. Completely silver-plated metals provide constant surface quality for consistent contact engaging and separating forces.
The PCB plug connectors are designed for two to eight pins and in 10,16 mm pitch they can carry a rated voltage of 1000 V. The screw connection, suitable for flexible wires up to 6 mm2 and solid wires up to 10 mm2, makes use of the tension sleeve principle. The wave solderable base housings are available in horizontal and vertical versions. A screw flange is available to secure the connection between the plug components and the base housing. The PCU 6 connector comes in two to nine-pin versions and offers additional flanges which can be attached directly in the housing.
For more information contact Sean Hadley, Phoenix Contact, 011 793 7121, [email protected]
PCB connectors for power systems Phoenix Contact
Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.
Read more...Digital link 40x faster than broadband Internet Hiconnex
Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.
Read more...Modular CAT7 inter-car-connection Hiconnex
Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.
Read more...SPE connector range Phoenix Contact
Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Compact power relays Future Electronics
Interconnection
The new HE-R Series power relays by Panasonic Industry are PCB-mounted relays for easy board assembly, with both two- and four-pole contact arrangement options.
Read more...High-density multicoax cable assembly RFiber Solutions
Interconnection
Withwave’s high speed and high-density Multicoax Cable Assemblies (WMX Series) provide a wide range of multiple coax connectors and flexible cable assemblies with a choice of 20, 40, 50, 67 or 110 GHz configurations.
Read more...Centralised distribution for M8 and M12 connectors Communica
Interconnection
Amphenol LTW’s distribution boxes facilitate efficient cable management, easy installation with pre-wired configuration, and provide a centralised distribution point for M8 and M12 connectors.
Read more...What is an RF connector? Spectrum Concepts
Editor's Choice Interconnection
If you look across the broader electromagnetic spectrum, the selection of the 3 kHz to 300 GHz frequency range for RF signals is a result of a balance between propagation characteristics, data transmission requirements, regulatory allocations, and the compatibility of electronic components and devices.
Read more...Multi-head battery contacting solutions Electronic Industry Supplies
Interconnection
INGUN has developed contacting solutions which boast low contact resistances, maximum reduced power losses, and stable, durable electrical connections in either single- or multi-head contacting configurations.
printer friendly version