Samtec's new Q2 shielded connector system (QMSS/QFSS Series) provides EMI suppression by incorporating shield plates along the sides of the connector and terminating them to the PCB via selected signal pins. Both single ended and differential pair versions are available as standard. Applications specific options with other signal/ground configurations are also available.
This new system has signal pins on 0,635 mm pitch and is available with 52, 104, 156, and 208 total pins per connector set. It is hot-pluggable with the shields and ground plane mating first followed by the signal pins. Application specific options allow three stage hot-pluggability by reducing the height of the selected signal pins.
Connectors are polarised to assure proper mating. In addition to vertical mating with 11 mm spacing between boards, edge-mount, power combo, and not-shielded versions are available.
Samtec is an end-to-end supplier of connectors, circuits, and sub-systems with extensive in-house Signal Integrity capabilities for design, analysis, manufacturing and assembly of high speed systems.
For more information contact Quentin van den Bergh, Arrow Altech Distribution, 011 923 9600, [email protected]
High current and voltage interconnect Hiconnex
Interconnection
The 972 series interconnect from Glenair ensures peak performance for the latest specification requirements in high-current, high-voltage, and high-frequency commercial aircraft applications.
Read more...M12 panel mount connectors Communica
Interconnection
Binder, a specialist in industrial circular connectors, offers a particularly wide range of M12 panel mount connectors that cover a wide variety of connection types, materials, and fastening solutions.
Read more...Ultra-low-power wireless module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.
Read more...16-channel multicell battery monitor Altron Arrow
Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.
Read more...Bringing Bluetooth Channel Sounding to automotive and beyond with KW47 Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.
Read more...Wi-Fi 6 and Bluetooth LE coprocessor module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.
Read more...Wi-Fi 6 plus Bluetooth LE SoC Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Silicon Labs’ SiWx917M SoC is the company’s lowest power Wi-Fi 6 SoC, ideal for ultra-low power IoT wireless devices using Wi-Fi, Bluetooth, Matter, and IP networking for secure cloud connectivity.
Read more...Simple battery charger ICs for any chemistry Altron Arrow
Editor's Choice Power Electronics / Power Management
The LTC4162 is a highly integrated, high voltage multi-chemistry synchronous monolithic step-down battery charger and PowerPath manager with onboard telemetry functions and optional maximum power point tracking.
Read more...Microchip enhances TrustMANAGER platform Altron Arrow
DSP, Micros & Memory
Firmware over-the-air updates and remote cryptographic key management provide scalable solutions for addressing IoT security challenges.
Read more...Blade terminals deliver greater power density Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version