Maxim MAX5074, a pulse-width-modulation (PWM) power IC with integrated power MOSFETs, is targeted at isolated power supplies for IEEE 802.3af-compliant, power-over-Ethernet (POE), powered devices such as IP phones, WLAN access points, and IP cameras. The MAX5074 is also ideal for converting -48 V to +3,3 V in power-sourcing equipment (POE), which includes switch/routers and midspans. The device can be used in both flyback- and forward-converter isolated power supplies with a wide ±11 V to ±76 V input-voltage range and up to 15 W output power.
The MAX5074 provides a 'look ahead' signal for driving secondary-side synchronous rectifiers, thus allowing greater than 90% efficiency without resorting to complicated drive schemes and additional discrete components. It includes thermal shutdown. It provides continuous short-circuit protection with hiccup-mode current limit, which reduces power dissipation under persistent overload conditions. The switching frequency is resistor-/capacitor-programmable up to 500 kHz, thus allowing the use of smaller external magnetics and capacitors. These features, together with the integrated MOSFETs, reduce power-supply size and cost for POE applications.
For more information contact CST Electronics, 011 452 0706 or Electrocomp (Value Added Reseller), 011 458 9000.
Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Compact 1250 V choke solution Electrocomp
Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version