Analogue, Mixed Signal, LSI


MMIC power amplifiers to 1,6 W

8 September 2004 Analogue, Mixed Signal, LSI

Hittite Microwave offers two new InGaP HBT MMIC power amplifiers for applications in cellular/3G, basestations and repeaters from 450 to 2200 MHz. The HMC452QS16G 1 W and the HMC453QS16G 1,6 W linear power amplifiers deliver output P1dB up to +32 dBm, and output IP3 as high as +50 dBm. These high dynamic range MMIC power amplifiers are suited as output amplifiers, or as pre-drivers in GSM, CDMA, and UMTS applications. Both products require only a single +5V supply, and both feature a Power Down (Vpd) control pin which can be used to turn down, or switch off the amplifier collector current for reduced system power consumption. The devices are housed in miniature 16 lead QSOP plastic packages with an exposed ground paddle.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SiP supports LTE/NB-IoT and GNSS
RF Design DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.

Read more...
Nordic expands nRF91 series
RF Design DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).

Read more...
LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...
LTE-M modules with integrated GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox introduces new LTE-M modules with integrated GNSS to boost industrial connectivity. The SARA-R52 and LEXI-R52 series optimise cost and performance, while eliminating the need for extra components.

Read more...
Marki Microwave introduces Prodigy
RF Design Telecoms, Datacoms, Wireless, IoT
Marki Microwave has introduced a new automated filter design tool called Prodigy, which brings MMIC filter design capability directly to the user.

Read more...
Nordic tech tour
RF Design News
Join the Nordic Tech Tour EMEA, and stay ahead in a rapidly evolving IoT landscape.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Multiband LTE cellular module with GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
The C10QS from Cavli has integrated GNSS capability which utilises Qualcomm IZat location technology Gen8C Lite and supports multiple satellite navigation systems.

Read more...
2 W MMIC power amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
Mini-Circuits has introduced the PMA5-83-2W+ GaAs MMIC power amplifier capable of delivering 2 W PSAT, with an operating bandwidth from 0,01 to 10 GHz.

Read more...
Precision-engineered stamped metal antennas
RF Design Telecoms, Datacoms, Wireless, IoT
New antennas from Pasternack hold solutions for consumer electronics, IoT, automotive, and industrial applications.

Read more...