100 A isolated POL converter responds quickly to step load changes
22 September 2004
Power Electronics / Power Management
Vicor says that its latest V·I chip voltage transformation module (VTM), the V048K015T100, is the first such product capable of 100 A. The VTM meets the demands of advanced DSP, FPGA, ASIC, processor cores and microprocessor applications at the point of load (POL) while providing isolation from input to output.
The company says it delivers up to 100 A from a package less than 4,1 cm³ in volume and responds in a fraction of one microsecond to no load-full load and full load-no load step demand changes.
It is optimised for very low output voltages at high currents, and touts an efficiency of 90% at 1,2 V/100 A, and better than 92% at 50 A. The VTM may be paralleled to deliver hundreds of amps at an output voltage settable from 0,8 to 1,6 V d.c. As a point-of-load current multiplier (32 X) with megahertz bandwidth, the VTM can eliminate bulk capacitors and the high power distribution losses caused by bussing high currents to the POL.
The VTM V048K015T100 is rated for a maximum continuous output of 100 A up to 1,5 VOUT and 150 W up to 1,6 V over a Vf input range of 26 to 55 V d.c. It can be operated either open- or closed-loop depending on the output regulation needs of the application. Operating open loop, the output voltage tracks its Vf input voltage with a transformation ratio, K=1/32, and an output resistance, ROUT =1,0 mΩ, to enable applications requiring a programmable low output voltage at high current and high efficiency. Closing the loop back to an input pre-regulator module or DC-DC converter compensates for ROUT.
The 1,5 V VTM achieves a current density of 24 A/cm³ in a V·I Chip package that is compatible with standard pick-and-place and surface-mount assembly processes.
Further reading:
High-precision current transducer
Power Electronics / Power Management
Danisense announces its new high-precision DP12IP current transducer designed for isolated DC and AC current measurement in demanding PCB-mounted power electronics applications.
Read more...
Secure holder for protected 18650 batteries
Power Electronics / Power Management
Designed for protected 18650 batteries up to 70 mm long, the holder offers secure retention for portable, industrial, and embedded applications.
Read more...
More room to scale
Altron Arrow
Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.
Read more...
Surface mount power amplifier for high-power applications
RF Design
Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.
Read more...
1200 V QSiC modules
Power Electronics / Power Management
SemiQ Inc has launched the QSiC Dual3, a family of 1200 V half-bridge MOSFET modules for motor drives in data centre cooling systems, grid converters in energy storage systems, and industrial drivers.
Read more...
MCOTS transient filter for military applications
RFiber Solutions
Power Electronics / Power Management
SynQor has announced the new MCOTS-F-28-T-HE transient half-brick filter, the latest addition to its MCOTS product family.
Read more...
Expanded range of high-thermal-performance QSiC modules
Power Electronics / Power Management
SemiQ’s half-bridge series for data centre power converters and industrial motor drives features low RDSON SiC MOSFETs and parallel SBD diodes for best-in-class power density and conversion efficiency.
Read more...
Transporting lithium batteries and IoT devices
Power Electronics / Power Management
With billions of rechargeable and non-rechargeable lithium cells and batteries powering most of the world’s consumer and industrial electronic devices, shipping them to customers through vast global logistics chains is often an overlooked topic.
Read more...
Setting a new benchmark for high-power DC load testing
Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...
Quality batteries are critical for IIoT
Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...
printer friendly version