The PCI-1750 has 16 digital input channels and 16 digital output channels, all with 2500 V d.c. isolation protection. The input channels support both wet contact and dry contact connections, making the PCI-1750 very easy to interface with other devices. The onboard 16-bit isolated counter and the 32-bit internal timer can be used for counting events and generating watchdog interrupts.
Providing 48 TTL-level digital input or output lines, the PCI-1751 emulates mode 0 of the 8255 PPI chip and users can configure each I/O port for either input or output. One of the distinguishing features of the PCI-1751 is that the user can set any port to be an output port by using a jumper. Ports thus designated are disabled from being software configurable as input ports and behave as default output ports on system start-up or reset. By contrast, most cards on the market make all ports default input ports. Two 16-bit timers and one counter can be used for counting events and generating watchdog interrupts.
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.
Read more...Computing in industrial environments Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...DDR5 DRAM series Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
Read more...Generate waveforms at 10 GS/s Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...Quad-port 10GBASE-T controller Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...IoT gateways Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...Keeping it cool within the edge data centre
Computer/Embedded Technology
The creation of more data brings with it the corresponding need for more compute power and more data centres, which, in turn, can create unique challenges with regards to securing the environment and cooling the IT loads.
Read more...NEX XON becomes Fortinet partner NEC XON
Computer/Embedded Technology
This designation demonstrates NEC XON’s ability to expertly deploy, operate, and maintain its own end-to-end security solutions, helping organisations to achieve digital acceleration.
printer friendly version