Interconnection


Differential pair array connector system

3 November 2004 Interconnection Information Security

Samtec's DPAM/DPAF Series is a 'differential pair array' connector system on 2,16 mm pitch. This high speed, high density interface system features a staggered layout of differential pairs with perimeter grounds and solder crimped to the tails for ease in processing.

This array system features a 10 mm mated height and is expected to perform at speeds up to 4 GHz per pair in a differential pair signalling configuration. The DP array connector system is available as standard in sizes of 48, 104, or 168 differential pairs, and signal pair density is about 81 pairs per square inch (approx 13 pairs/cm²). Mated stack height is 10 mm, with 2,54 mm between rows. 8, 15, and 23 pairs per row is standard.

For more information contact Quentin van den Bergh, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Blade terminals deliver greater power density
Spectrum Concepts Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
What’s the big deal with open pin fields?
Spectrum Concepts Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.

Read more...
Wide input voltage buck-boost converter
Altron Arrow Power Electronics / Power Management
The MAX77859 from Analog Devices is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range of between 2,5 and 22 V.

Read more...
High-density power module for AI at the edge applications
Altron Arrow Power Electronics / Power Management
The MCPF1412 power module from Microchip has integrated I2C and PMBus interfaces for flexible configuration and monitoring.

Read more...
When it comes to long-term reliability of RF amplifier ICs, focus first on die junction temperature
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
When considering the long-term reliability of integrated circuits, a common misconception is that high package or die thermal resistance is problematic. However, high or low thermal resistance, by itself, tells an incomplete story.

Read more...
High-performance processor for edge-AI
Altron Arrow DSP, Micros & Memory
The STM32MP23 microprocessor from STMicroelectronics is the latest addition to the STM32MP2 series, designed to meet the demands of industrial, IoT, and edge AI applications.

Read more...
6 GHz power amplifier
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ ADPA1116 is a 0,3 to 6 GHz GaN-based power amplifier with a saturated output power (POUT) of 39,5 dBm.

Read more...
Back-up securely and restore in seconds
Betatrac Telematic Solutions Editor's Choice Information Security Infrastructure
Betatrac has a solution that enables companies to back-up up to 8 TB of data onto a device and restore it in 30 seconds in an emergency, called Rapid Access Data Recovery (RADR).

Read more...