Analogue, Mixed Signal, LSI


Switchable video filters

9 February 2005 Analogue, Mixed Signal, LSI

Maxim has developed 3-channel, switchable HD/SD video-reconstruction filters and buffers for 1080i, 720p, 480p, and 480i video scanning-system standards. Each channel of the MAX7454/MAX7455 combines a lowpass filter with a video buffer capable of driving a standard 150 Ω video load with a 2 V peak-to-peak signal.

The magnitude response of the lowpass filter can be switched between a 10 MHz and 30 MHz bandwidth through a control pin. The input and output signals are DC-coupled to the MAX7454/MAX7455, eliminating AC-coupling caps. These devices are ideal for anti-aliasing or DAC-output video-reconstruction applications in digital video devices such as HD STBss, as well as HDTVs as CRTs, LCDs, plasmas, and DLPs.

The MAX7454 has an output buffer gain of +6 dB and the MAX7455 has an output buffer gain of +12 dB. The 3-channel devices are ideal for RGB or Y Pr Pb component video signals in interlaced, progressive scan, or high-definition formats.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Thick film power resistors
Electrocomp Passive Components
Vishay has released a new product to the market, its thick film power resistor, which is offered in a clip-mount TO-247 package.

Read more...
Telemetry retrofit for sustainable resource management
CST Electronics Test & Measurement
AquaMeter is a cost-effective secure telemetry retrofit that can easily be added to hundreds of millions of legacy mechanical water meters.

Read more...
Precision JFET op-amp
Altron Arrow Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...
HiRel components from Kyocera AVX
Electrocomp Passive Components
Kyocera AVX Corporation is a leading supplier of advanced components and interconnect solutions, offering a broad selection of passive components and connectors.

Read more...
High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...
Achieving lowest cost, scalable and dynamic wireless mesh network installations
CST Electronics Editor's Choice Telecoms, Datacoms, Wireless, IoT
In many situations it is desirable for sensors to be connected wirelessly in a mesh network as this saves infrastructure and cost since long cabling runs are not required.

Read more...
2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...
Dual-channel ADC for RF applications
RFiber Solutions Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.

Read more...