Interconnection


More options for shielded high speed terminals

20 April 2005 Interconnection

Samtec's Q2 second generation high speed connector system (QMSS/QFSS Series) options have been expanded with power pin options, positive alignment features, edge-mount designs, and single-ended and differential pair signal routing. EMI shielding is now optional for applications that require the increased insertion depth and other rugged features this system offers without the grounded side shields.

This micro-rugged high speed system has signal pins on 0,635 mm pitch and 11 mm mated height. It is available with up to 160 I/Os per connector set in a single-ended configuration and up to 64 pairs in a differential pair configuration. It is hot-pluggable with the shields and ground plane mating first followed by the signal pins. Application specific options allow three stage hot-pluggability.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Locking power jacks
23 October 2019, TRX Electronics , Interconnection
The new BKZ series from Switchcraft solves the common problem of accidental disconnection of a power supply by adding a sturdy twist-lock to the company’s most popular form factor. The intuitive design ...

Read more...
Automotive-qualified TVS diodes
25 November 2019, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
Robust DC link capacitors
25 November 2019, Electrocomp , Passive Components
TDK’s new B2568* series of EPCOS MKP DC link power capacitors offer high robustness under harsh environmental conditions. The new capacitors are designed for voltages of between 900 and 3000 V d.c. and ...

Read more...
AC film capacitors
25 November 2019, Electrocomp , Passive Components
The B3237x FilterCaps MKD range of EPCOS AC film capacitors from TDK offer a 200 to 1000 VRMS voltage range, a 2475 V d.c. maximum voltage rating, and a ±5% tolerance. The B3237x series is available in ...

Read more...
Waterproof Micro USB connector
23 October 2019, Electrocomp , Interconnection
As part of a new product line from GCT, the aquanex waterproof range brings together high-performance USB connectors with IP67 rated sealing. The first connector launched from the aquanex range, the USB3500, ...

Read more...
Automotive dead reckoning module
25 November 2019, Electrocomp , Telecoms, Datacoms, Wireless, IoT
The MC-1612-DG, made by Locosys, is a single-band multi-system with an Arm base processor. It not only supports GPS, GLONASS, Galileo, QZSS and SBAS, but also has a Flash memory, TCXO, RTC crystal, LNA ...

Read more...
Solderable grounding seal
25 November 2019, Würth Elektronik eiSos , Interconnection
With the WE-SMGS, Würth Elektronik offers solderable seals for surface mounting. The WE-SMGS consists of a temperature resistant foam material, which combines the conductive seals with high elasticity. ...

Read more...
Waterproof Micro USB connector
25 November 2019, Electrocomp , Interconnection
As part of a new product line from GCT, the aquanex waterproof range brings together high-performance USB connectors with IP67 rated sealing. The first connector launched from the aquanex range, the USB3500, ...

Read more...
Magnetic jacks of all trades
25 November 2019, Electrocomp , Interconnection
Molex magnetic jacks incorporate wire-wound components (magnetics) in standard RJ45 jacks. These integrated magnetics, resistors and/or capacitors filter common-mode noise to provide signal integrity, ...

Read more...
Modular board-mounted contacts
25 November 2019, TRX Electronics , Interconnection
Bourns modular contacts are off-the-shelf spring interconnect devices offering a low-profile design with proven reliability to 50 000 mated cycles. Presented in the form of 70AA, 70AB and 70AD male and ...

Read more...