Powerful 7,62 mm pitch plug connector

18 May 2005 Interconnection

Phoenix Contact's Power Combicon PC 5 plug connector system is based on the PC 4 system. With a compact pitch of 7,62 mm, all PC 5 plug components provide a nominal voltage of 600 V (UL approved). The permitted current is 32 A. An integrated steel upper spring provides additional contact reliability, especially during extreme changes in power or temperature.

The system has been designed for 2-12 pin layouts. The screw connection, for flexible conductors up to 6 mm², uses the tension sleeve principle. A screw flange for securing the connection between the plug component and the base housing is supplied with the plug connector.

The plug's shield contact provides a high-quality connection to the shielding mesh to prevent electrical interference. The screw integrated in the connector flange ensures that the shroud is securely connected to the metal front. If the housing or front plate is made of a non-conducting material, shielding can be connected directly to the PCB.

For more information contact Electrocomp, +27 (0)11 458 9000 or Sean Hadley, Phoenix Contact, +27 (0)11 793 7121, [email protected]


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Thinner pattern coils set to revolutionise wireless charging
Electrocomp Power Electronics / Power Management
TDK developed the 0,76 mm thick charging coils using a unique pattern coil technology without employing conventional lithographic exposure and etching techniques.

Double-row connectors for quick-connect applications
Spectrum Concepts Interconnection
Mill-Max announced a new range of double-row, gold-plated connectors in either spring-loaded or target versions.

Samtec site’s search function gets a UX upgrade
Spectrum Concepts Interconnection
Samtec announced a major upgrade to its on-site user search experience, including improvements in both performance and mobile compatibility.

Spring-loaded connectors with rolling ball interface
Spectrum Concepts Interconnection
Omniball spring-loaded connectors feature a unique rolling ball interface, enabling contact to be made in both axial and non-axial alignments.

RF cavity filters for 5G
Electrocomp Telecoms, Datacoms, Wireless, IoT
Temwell has established a one-stop service for 5G RF cavity filters, featuring high specifications across a wide range of power requirements.

Multilayer ferrite beads
Electrocomp Passive Components
As direct replacements for the discontinued BMB series, TE Connectivity’s BMC multilayer ferrite beads cover a wide range of impedance characteristics.

Mouser stocks wide selection of the latest Phoenix Contact products
TRX Electronics Interconnection
The offering covers a vast selection of sensors, controllers, terminal blocks, connectors and wireless Ethernet products.

New SMT pins utilise a grooved pattern design
Spectrum Concepts Interconnection
Mill-Max expands its range of SMT pins with the introduction of three new series that feature the Sure-Hold grooved pattern design.

Wire-to-board connectors with 0,8 mm pitch
Electrocomp Interconnection
An extensive array of circuit sizes (2 to 20 circuits) enables the extension of device functionality and features to meet product development needs.

Regional edition of Degson catalogue
Electrocomp Technical Literature
Electrocomp has released a special regional edition of Degson’s short-form general catalogue. The 8-page catalogue summarises Degson’s range of PCB terminal blocks, DIN-rail terminal blocks, heavy-duty ...