|
|
|
Integrated 'building block' power converter delivers 15 A
15 June 2005, Power Electronics / Power Management
International Rectifier has introduced a fully-optimised, full-function 15 A single output synchronous buck converter device that it says achieves over 90% efficiency at full load. The iPOWIR iP1203 is a flexible solution that addresses requirements from 5,5 Vin to 13,2 Vin and 0,8 Vout to 8 Vout, maintaining a full load capability of 15 A.
The iP1203 building block is designed to simplify DC-DC point-of-load (POL) converters for network processor units (NPUs) and ASIC power rails within networking and telecom systems. It is well suited for use in two-stage distributed power architectures being fed from either a regulated isolated brick or an unregulated DC bus converter.
Offering superior power density, the device integrates a full-function PWM control IC, trench MOSFETs and passive components enabling superior thermal performance at raised ambient temperature without de-rating.
The iP1203 addresses important networking and telecom power system requirements such as hiccup over-current, over-temperature and over-voltage protection, external synchronisation, power good and soft start. The building block is housed in an LGA package (9 x 9 x 2,3 mm). |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
- N-channel enhancement mode FET
26 June 2019, Electrocomp, Power Electronics / Power Management
Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
- Digitally controlled power supply
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power’s nanofleX series of configurable, modular, digitally controlled AC-DC power supplies is constructed in a compact, low-profile 1U mechanical chassis format that suits today’s space constrained ...
- Adaptive LED current ripple suppressor
26 June 2019, Altron Arrow, Power Electronics / Power Management
Diodes Incorporated announced the availability of the AL5822 LED current ripple suppressor, which provides high levels of ripple suppression while maintaining high power factor for commercial and industrial ...
- DC-DC power module reference design
31 July 2019, Würth Elektronik eiSos, Power Electronics / Power Management
MagI³C power modules from Würth Elektronik are DC-DC converters with integrated controller IC, inductors and capacitors.
With the new MagI³C power supply reference design, the manufacturer aims to demonstrate ...
- Buck converter with low quiescent current
31 July 2019, Avnet South Africa, Power Electronics / Power Management
Texas Instruments introduced an ultra-low-power switching regulator with what it claims is the industry’s lowest operating quiescent current (IQ) at 60 nA. The TPS62840 synchronous step-down converter ...
- 100 W embedded switch-mode power supply
31 July 2019, Conical Technologies, Power Electronics / Power Management
Traco Power announced the release of its new TML 100 series encapsulated power supplies. The TML 100 series comes in a chassis-mount casing with screw terminal block for easy connection.
Despite their ...
- High-voltage converter
31 July 2019, Altron Arrow, Power Electronics / Power Management
The Viper26K from STMicroelectronics is a high-voltage converter integrating a 1050 V avalanche-rugged power section, with PWM current mode control. The power MOSFET allows designers to extend input voltage ...
- MCUs with industrial communication interfaces
31 July 2019, Avnet South Africa, DSP, Micros & Memory
Texas Instruments introduced new communications capabilities on its C2000 microcontrollers (MCUs). C2000 F2838x devices enable designers to use a single chip to implement connectivity, including EtherCAT, ...
- Lithium battery charger IC
31 July 2019, NuVision Electronics, Power Electronics / Power Management
The MP2667 from Monolithic Power Systems is a highly integrated, single-cell, Li-ion/Li-polymer battery charger with system power path management for space-limited portable applications. The MP2667 takes ...
|
|
