|
|
|
Power factor correction capacitors
13 July 2005, Passive Components
Power capacitors for power factor correction are used to reduce not only the reactive power but also the distortion (THDV/THDI) in the power line to improve and stabilise the energy quality. Previously, two 28 kVar capacitors had to be used in compensation equipment with a detuning level of 7% on a 400 V power line (50 Hz) in order to obtain a 50 kVar stage.
Epcos' new type of PhaseCap HD series has an output of 56 kVar at 440 V (50 Hz) and allows a 50 kVar stage to be implemented using only one capacitor.
Customer benefits include: reduced space requirement; lower cost as less material used; higher packing density per cabinet; time saved thanks to faster installation; proven MKK dry technology. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Sealed enclosures for industrial electronics
26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
- Consumer grade power inductors
26 June 2019, Electrocomp, Passive Components
Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
- High-current shielded power inductors
26 June 2019, Electrocomp, Passive Components
The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
- Shielded power inductors
26 June 2019, RF Design, Passive Components
High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR).
The inductors in the XAL7050 ...
- Miniaturised CO2 sensor
29 May 2019, Electrocomp, Analogue, Mixed Signal, LSI
Thanks to new energy standards and better insulation, buildings have become increasingly energy efficient, but at the cost of accelerated deterioration in air quality. Since high CO2 levels compromise ...
- PPTC resettable fuses
29 May 2019, Electrocomp, Circuit & System Protection
The Bourns Multifuse product line has added the new 8 V and 6 V rated Model MF-FSML/X series of low-resistance, surface-mount polymer positive temperature coefficient (PPTC) resettable fuses. The new ...
- High-power resettable fuses
29 May 2019, Electrocomp, Circuit & System Protection
Bourns has introduced its new 3425 (8764 metric) size, surface-mount MF-GSMF series of Multifuse polymer PTC resettable fuses, beginning with model MF-GSMF300/36X-2. The initial model has higher voltage ...
- Automotive qualified chip resistors
29 May 2019, Electrocomp, Passive Components
Bourns announced the introduction of its new sulphur-resistant, AEC-Q200 compliant thick film chip resistor series. The new Model CRxxxxA-AS series is available in eight different footprints from small ...
- Is the supply chain broken?
30 April 2019, Electrocomp, Diel Met Systems, ExecuKit, NuVision Electronics, RF Design, This Week's Editor's Pick, News
The world’s insatiable demand for electronic goods has created a monster: a supply chain that spans the globe and relies on the entirety of our collective knowledge and experience in the pursuit of industry.
- Inductor learning kit
30 April 2019, Würth Elektronik eiSos, Passive Components
Co-developed by Würth Elektronik eiSos and Texas Instruments, the TI-PMLK Buck Würth Elektronik Edition is a learning kit to autonomously study the impact of magnetics in a power supply using a buck board ...
- Hybrid over-voltage protectors
30 April 2019, Electrocomp, Circuit & System Protection
The brand new GMOV line of over-voltage protection components from Bourns combines the company’s patented, space-saving FLAT gas discharge tube (GDT) technology with a metal oxide varistor (MOV) to create ...
- Stacked patch antenna for GNSS
30 April 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
Molex’s high-accuracy stacked patch GNSS (global navigation satellite system) antenna features a 50 Ω impedance rating, 2 W RF power rating, and below -10 dB return loss. It offers optimised signal processing ...
|
|
