Remote emulation server for Blackhawk emulators

DSP, Micros & Memory

27 July 2005 DSP, Micros & Memory

The Blackhawk Remote Emulation Server SE allows Blackhawk USB560 and PCI JTAG emulators installed in a PC with Ethernet interface to be accessed over a local area network (LAN) from another PC running Code Composer Studio. Users can share the latest high performance emulation technology from Texas Instruments, reducing the need and cost for multiple units. This package from Blackhawk contains all of the software necessary to set up a remote server for multiple machines.

* Server requirements: PC running Windows 2000 or XP; does not require Code Composer Studio installed; installed Blackhawk Emulator and device drivers; Ethernet or wireless networking under TCP/IP.

* Client requirements: PC running Windows 2000 or XP; Code Composer Studio v2.2 and later; Ethernet or wireless networking under TCP/IP; CD-ROM drive for client side software installation.

Remote Emulation Server SE supports all Blackhawk USB560, PCI and LAN-based emulators only. Blackhawk JTAG Emulators and Remote Emulation Server SE are available from your local distributor.

Share this article:

Cortex-M33 performance for cost-sensitive designs
Future Electronics DSP, Micros & Memory
The STM32C5 series from STMicroelectronics introduces a new generation of entry-level microcontrollers engineered to deliver enhanced processing capability, modern security, and cost-effective scalability for connected embedded applications.

Read more...

Memory shortage 2026: Engineering implications for South Africa
DSP, Micros & Memory
[Sponsored] Addressing this challenge requires system-level thinking and adoption with McKinsey Electronics providing the engineering and sourcing framework required to maintain system resilience despite ongoing global constraints.

Read more...

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...

Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...

Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...

Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...

Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...

The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...

Cost-efficient wireless MCU
Future Electronics DSP, Micros & Memory
The STMicroelectronics STM32WBA2 is a cost-effective, low-power wireless microcontroller designed for energy-sensitive IoT applications.

Read more...

Categories

DSP, Micros & Memory

Remote emulation server for Blackhawk emulators

Further reading:

Publications by Technews