Opto-Electronics


New chip-carrier base design enables low-profile LED units to perform over higher temperatures

27 July 2005 Opto-Electronics

BivarOpto has introduced new surface mount RGB-based devices for optimised control of colour and brightness, including a brilliant-white device with a wide 120° viewing angle, packaged in low-profile, industry standard PLCC-4 (plastic leaded chip carrier). Applications most suited for this package include high-contrast video displays such as LCD monitors, backlighting in automotive dash clusters and exterior automotive lighting, instrument panel backlighting, navigation and switching systems, and medical instrumentation.

The SMLC RGB design features an internal tri-chip circuit, employing three individually addressable LED dies. The lens is water-clear when off. The tri-chip RGB design is comprised of a single AllnGaP and two InGaN/SIC chip dies, featuring peak wavelengths of 625, 568 and 430 nm respectively. The result is a programmable white or brilliant full colour display. Absolute maximum rating of forward current drive is 200 mA.

Other models in the SMLC product family include single and bi-colour chip available in red, green, blue and yellow, including ultra and HE colours such as 395 UV-525 nm pure green. The PLCC-4 configuration, including a 4-pad metal heat dissipating base, measures 1,9 mm high, with footprint of 2,8 x 3,5 mm.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SIGLENT launches new 8 GHz DSO
Vepac Electronics Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.

Read more...
Mission-critical RF transceiver
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
Ultra-portable spectrum analyser
Vepac Electronics Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.

Read more...
Versatile 3-in-1 instrument
Vepac Electronics Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.

Read more...
Enhanced breaker status and communication module
Schneider Electric South Africa Opto-Electronics
Schneider Electric has announced the launch of its new Breaker Status and Communication Module (BSCM) Modbus SL/ULP, which delivers enhanced performance, improved connectivity, and simplified integration for power distribution systems.

Read more...
Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.

Read more...
PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved