Rework system for SMT parts optimises heating

27 July 2005 Manufacturing / Production Technology, Hardware & Services

The MS9000SA is a easy-to-use rework machine from MS Engineering. The MS9000SA is a combined pick-and-place machine with combination balanced heater. The heater system comprises a hot gas system for the top side of the board, and a wide infrared (IR) emission system for the bottom side.

The MS9000SA was developed for the work and rework of BGAs, CSPs, QFPs, 0603 tip, and other SMDs as well as leaded types. Newer BGAs are equipped with 1000 or more solder balls, and feature ball pitches to 0,3 mm or less. They can be in package sizes of 45 mm square or more. In the past, it was near impossible to safely, precisely, and quickly solder and re-solder (changing) such parts without a heater and a temperature control mechanism to allow heating of all sides of each part. With the MS9000SA is now possible to supply optimal heat to all balls (leads) of a part with the quick starting, high density heaters.

The MS9000SA has two kinds of temperature control systems. The standard SA mode is convenient and has automatic temperature profile operation, while the S mode is effective when a more exact heating characteristic is required, or when it corresponds to special heat load.

The key features are:

* Six heating zones offer flexible thermal control for lead-free soldering.

* Top convection heaters and bottom IR heaters.

* Powerful thermal capability of up to 4080 W.

* Instant profiling system using digital thermal feedback.

* Highly-accurate visual alignment system.

* User-friendly touch panel operation.

* Solder paste printing capability.

Further reading:

The effect of seasonal changes on ESD performance in South Africa
Actum Editor's Choice Circuit & System Protection Manufacturing / Production Technology, Hardware & Services
Electrostatic discharge performance is influenced by several environmental factors, with relative humidity being one of the most important. This is particularly relevant in South Africa, where seasonal changes can result in significant differences in humidity levels.

Read more...

---

High precision in-line conformal coating inspection system
MyKay Tronics Manufacturing / Production Technology, Hardware & Services
Conformal coating is widely used to protect electronics from moisture or other environmental hazards. It is critical to know if coatings are properly applied; covering what is meant to be covered and not covering what should be exposed.

Read more...

---

Soldering day highlights
Manufacturing / Production Technology, Hardware & Services
JAPAN UNIX has published a new event report and highlight video from their UNIX SOLDERING DAY 2026 in Hungary. This event reflects on their commitment to supporting manufacturers not only through soldering automation systems, but also through technical education, live demonstrations, hands-on training, and practical engineering know-how.

Read more...

---

Clearing the Static: Electrostatic Discharge
Actum Manufacturing / Production Technology, Hardware & Services
A cordless ESD (Electrostatic Discharge) wrist strap does not work by grounding the person in the same way as a traditional wired wrist strap. Instead, it works by reducing or balancing the static charge on your body so that you are less likely to discharge electricity into sensitive electronic components.

Read more...

---

Engineering trust in South Africa’s SMT sector
ZETECH ONE Manufacturing / Production Technology, Hardware & Services
From a small Johannesburg start-up to a trusted SMT technology partner, Zetech One has spent four decades helping South African electronics manufacturers improve production quality, efficiency and reliability.

Read more...

---

The new reality of PCB material supply
Jemstech Editor's Choice Manufacturing / Production Technology, Hardware & Services
How resilient manufacturing strategies are helping OEMs navigate a changing global supply chain.

Read more...

---

Streamlining Device Programming with the AutoBee-D1
Vepac Electronics Manufacturing / Production Technology, Hardware & Services
The AutoBee-D1 desktop automated programmer is designed to simplify the programming of devices, while delivering consistent accuracy, high throughput and reduced manual intervention.

Read more...

---

Zero PFAS die attach paste
Testerion Manufacturing / Production Technology, Hardware & Services
With silver price volatility increasing and sustainability requirements accelerating across semiconductor assembly, MacDermid Alpha Electronics Solutions introduces ATROX CD 560-1, a zero per- and polyfluoroalkyl substance (PFAS) alternate silver filler die attach paste.

Read more...

---

Precision jet printing for advanced PCB designs
MyKay Tronics Manufacturing / Production Technology, Hardware & Services
Mycronic’s BA 01 small dot ejector delivers unmatched precision in solder paste jet printing for advanced PCB designs.

Read more...

---

Strengthening local electronics manufacturing through investment and innovation
Microtronix Manufacturing Editor's Choice Manufacturing / Production Technology, Hardware & Services
Microtronix South Africa cements its commitment to local manufacturing with ongoing investments in production capacity, skills development, and job creation.

Read more...

---