The 25-400 VA MTL transformers from Murrelektronik have a novel and compact design. The redevelopment of all transformer components has meant that many useful features have now been integrated. For example, it now has an LED indicator on the input side, which signals the presence of the primary voltage. The multiple winding on the primary side means that each transformer can be used for both 230 and 400 V a.c. Additional terminal blocks also allow voltage adaptations of ±15 V a.c. to be made.
The highlight of the new product line is the removable combination foot plate, which can be screw-mounted in the normal way, snapped on or support rail-mounted. However, its benefits are particularly evident during assembly: the lightweight mounting plate can be removed from the housing and attached separately. The transformer is then simply snapped on again and it is mounted. This new easier type of assembly system is available for the entire product line.
The internal features have also undergone further development: the transformer is supplied with two equivalent output voltages as standard (eg 2 x 12 V a.c. or 2 x 115 V a.c.). These outputs can be connected in parallel or in series via plug links within the transformer to obtain the required secondary voltage or output power. PE and 0 V can be bridged in the same way.
As well as the transformers, power supply units with transformers up to 10 A are also available with the same design.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version