Passive Components


Low-profile, high-current inductor delivers low DCR/μH

2 November 2005 Passive Components

Vishay Intertechnology has extended the IHLP family of low-profile, high-current inductors with a new device that it claims offers the lowest DCR/µH available in a 10,2 x 10,2 mm package with a low 4 mm height profile.

The new IHLP-4040DZ-15 is a high-performance, space- and power-saving solution that features industry-leading specifications including DCR values down to 0,50 mΩ at 0,19 μH. This power inductor is intended for DC-DC converter applications in end products including next-generation mobile devices; notebooks, desktop computers, graphics cards; and low-profile, high-current power supplies and point of load converters. It will also be used in distributed power systems and to regulate power for FPGAs.

In addition, the IHLP-4040DZ-15 handles high transient current spikes without saturation and operates over a frequency range up to 1 MHz. Saturation current and typical DCR values for the inductor range up to 44 A and from 0,50 mΩ to 5,20 mΩ, respectively, over an inductance range of 0,19 μH to 2 µH. Inductance tolerance is 20%. It is rated for use over -55 to +125°C.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...
Converting high voltages without a transformer
Altron Arrow Editor's Choice Power Electronics / Power Management
With appropriate power converter ICs, such as the LTC7897 from Analog Devices, many applications can be suitably powered without having to use complex and cost-intensive transformers.

Read more...
MCU platform for battery-powered devices
Altron Arrow DSP, Micros & Memory
The MCX W23 is a new dedicated wireless MCU platform from NXP for battery-powered sensing devices.

Read more...
Precision MEMS IMU modules
Altron Arrow Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.

Read more...
Vibration-resistant axial capacitors
RS South Africa Passive Components
TDK Corporation has unveiled the B41699 and B41799 series of ultra-compact aluminium electrolytic capacitors, engineered to withstand operating temperatures of up to 140°C.

Read more...
Altron Arrow introduces GX10 supercomputer
Altron Arrow AI & ML
Powered by the NVIDIA GB10 Grace Blackwell superchip, this is desktop-scale AI performance previously only available to enterprise data centres.

Read more...
MEMS with embedded AI processing
Altron Arrow Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.

Read more...
Multicore CPUs with on-chip accelerators
Altron Arrow DSP, Micros & Memory
NXP’s MCX N94x and N54x MCUs offer advanced features for consumer and industrial applications, including connectivity, security, and power management.

Read more...
Capacitors for demanding industrial applications
Passive Components
TDK Corporation has announced its X1 capacitors of the EPCOS B3291xH/J4 series for power line filtering of electromagnetic interferences in demanding automotive and industrial applications with a rated AC voltage of up to 480 V.

Read more...
RF agile transceiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The AD9361 is a high performance, highly integrated RF Agile Transceiver designed for use in 3G and 4G base station applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved