|
|
Portfolio of board-to-cable connectors
2 November 2005, Interconnection
Erni's LPV family of IEC 60603-13 (DIN 41651) compliant connectors offers a comprehensive spectrum of board-to-cable connectors with a 2,54 mm pitch. The proven and reliable IDC technology used ensures gas-tight and corrosion-resistant contact with a consistently low contact resistance throughout the product's service life. An integrated polarising key prevents incorrect mating and damaged contacts. Optional locking latches secure the connection by providing additional protection against inadvertent release caused by strain from vibrations and shock loads. When the locking latch is opened, the female connectors are lifted out of the contact evenly in order to prevent damage.
The female connector is designed to be used with 1,27 mm ribbon cables. The IDC contacts cut through the insulation material, so it is not necessary to strip off the insulation. The strain relief clamps that are included in the delivery make it possible to lead cables out at an angle of 90 or 180° to the plug connector. The male connectors are available with press-fit, wave-soldering and through-hole-reflow termination. Besides the standard overall height of 17 mm, there are also low-profile, 9,4 mm versions available. There are 10 housing sizes available for both male and female connectors in pin configurations with 10, 14, 16, 20, 26, 34, 40, 50, 60 or 64 positions. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Balancing performance, speed and cost for rugged interconnects
25 September 2019, Avnet South Africa, Interconnection
System designers want the smallest and lightest possible connectors for use in aerospace and military electronics, while industrial and transportation electronics are expected to deal with the same harsh environments at more competitive cost points.
- 18-slot PXI Express chassis
25 September 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
Schroff nVent has expanded its Schroff product range for PXI systems by adding an 18-slot Schroff PXI Express system with a modular structure which is used in complex measuring and simulation applications.
The ...
- Sealed plastic connectors
25 September 2019, TRX Electronics, Interconnection
The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
- Connector module for 4PPoE
25 September 2019, Webb Industries, Interconnection
Webb Industries has introduced the new AMJ-S Module 2G from Telegärtner, optimised and redesigned to provide demanding applications with operational reliability under extreme mechanical and electrical ...
- RF coaxial IDC connectors
28 August 2019, Future Electronics, Interconnection
AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
- Sealed plastic connectors
28 August 2019, TRX Electronics, Interconnection
The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
- Digital workflow eases selection of Schroff products
28 August 2019, Actum Electronics, Enclosures, Racks, Cabinets & Panel Products
nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...
- Waveguide to coax adaptors
31 July 2019, RF Design, Interconnection
Pasternack has launched a new series of waveguide to coax adapters for use in 5G, telecommunications, automotive radar, satellite communications, point-to-point radio, and terrestrial communications applications.
The ...
- SMT test points and terminal pins
31 July 2019, Vepac Electronics, Interconnection
Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
- Modular fibre-optic patch panel
31 July 2019, Webb Industries, Interconnection
The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
- Subrack configuration software
31 July 2019, Actum Electronics, Design Automation
Schroff has launched the EuropacPRO Subrack Configurator, an intelligent online design tool that enables users to configure individual EuropacPRO subracks for vertically-installed applications.
This ...
- Vent panels for increased airflow and EMI protection
26 June 2019, Actum Electronics, Circuit & System Protection
Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
|
|
