Analogue, Mixed Signal, LSI


SMT MMIC RF components

16 November 2005 Analogue, Mixed Signal, LSI

Hittite Microwave has introduced four products in its new high frequency LH5 leadless hermetic SMT package, suited for high reliability, space and military applications. The HMC441LH5 is a 7 to 15,5 GHz GaAs MMIC medium power amplifier providing 15 dB gain and +21,5 dBm of saturated power at 25% PAE. This amplifier requires no external components, and the internally-DC blocked RF I/Os make it an ideal linear gain block or driver amplifier. For up- down-conversion from 7 to 14 GHz, the HMC141LH5 is a passive double-balanced mixer featuring LO to RF and LO to IF isolations of 35 dB, IF bandwidth of DC to 2 GHz, and input IP3 of +23 dBm. The HMC424LH5 6-bit GaAs MMIC digital attenuator is rated from DC to 13 GHz, and provides monotonic attenuation from 0,5 to 31,5 dB, in 0,5 dB steps. The HMC344LH5 for DC to 12 GHz, is a non-reflective GaAs MMIC SP4T switch featuring 42 dB isolation, and 1,8 dB insertion loss.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SiP supports LTE/NB-IoT and GNSS
RF Design DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.

Read more...
Nordic expands nRF91 series
RF Design DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).

Read more...
LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...
LTE-M modules with integrated GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox introduces new LTE-M modules with integrated GNSS to boost industrial connectivity. The SARA-R52 and LEXI-R52 series optimise cost and performance, while eliminating the need for extra components.

Read more...
Marki Microwave introduces Prodigy
RF Design Telecoms, Datacoms, Wireless, IoT
Marki Microwave has introduced a new automated filter design tool called Prodigy, which brings MMIC filter design capability directly to the user.

Read more...
Nordic tech tour
RF Design News
Join the Nordic Tech Tour EMEA, and stay ahead in a rapidly evolving IoT landscape.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Multiband LTE cellular module with GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
The C10QS from Cavli has integrated GNSS capability which utilises Qualcomm IZat location technology Gen8C Lite and supports multiple satellite navigation systems.

Read more...
2 W MMIC power amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
Mini-Circuits has introduced the PMA5-83-2W+ GaAs MMIC power amplifier capable of delivering 2 W PSAT, with an operating bandwidth from 0,01 to 10 GHz.

Read more...
Precision-engineered stamped metal antennas
RF Design Telecoms, Datacoms, Wireless, IoT
New antennas from Pasternack hold solutions for consumer electronics, IoT, automotive, and industrial applications.

Read more...