Maxim's MAX9727 is a quad audio line driver that provides a complete line-output solution for consumer audio systems. When operated from a single +5 V supply, it outputs 3 V rms signal levels; with a +3,3 V supply, it outputs 2 V rms signals. The DirectDrive MAX9727 is intended for multichannel PC sound cards, set-top boxes, A/V receivers, DVD players, and a variety of portable media players.
Maxim's innovative DirectDrive technology creates an on-chip negative supply, which allows the MAX9727 line driver to output full line-level signals while operating from a single power supply. As an added benefit, the device's output signal is biased at ground. This eliminates the need for DC-blocking capacitors, improving the low-frequency response, reducing distortion, and saving cost.
Integrated differential inputs improve system noise management. Gain can be precisely controlled by external resistors. The MAX9727 features a high 100 dB PSRR, 111 dB signal-to-noise ratio, and ultra-low 0,0005% THD+N, as well as click-and-pop suppression.
Available in 20-pin QSOP package, the MAX9727 is specified over -40 to +85°C.
Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...NeoMesh on LoRa CST Electronics
Telecoms, Datacoms, Wireless, IoT
Thomas Steen Halkier, CEO of NeoCortec, recently gave a keynote speech where he spoke about “NeoMesh on LoRa: Bringing true mesh networking to the LoRa PHY”.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...New 3dB hybrid couplers Electrocomp
Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Robust series of vertical-mating battery connectors Electrocomp
Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version