Enclosures, Racks, Cabinets & Panel Products


Plastic boxes and enclosures for all purposes

14 June 2006 Enclosures, Racks, Cabinets & Panel Products

PCI (Plastic Converter Industries) carries a variety of product ranges that it says covers just about every requirement its customers may have. The company manufactures and distributes its own 'Bateleur' range of enclosures, as well as various imported lines.

The following is a summary of products available from PCI. Should one require a special or custom enclosure, PCI can try to either import or it will manufacture it.

* PCI range: PCI is the manufacturer and distributor of the Bateleur range of enclosures with or without screw-on lids, plug sockets, wall mounts etc.

* European range: PCI stocks the range of Gewiss enclosures. These enclosures are moulded in ABS and are suitable for electronic components. The clear lids are moulded in polycarbonate. The bases are grey. All products are designed to IP65 protection level.

* Taiwanese range: PCI offers a range of Gainta enclosures.

* South African range: the company stocks a range of Enlec enclosures. The enclosures are moulded in polycarbonate and are available with either clear or opaque lids. All enclosures have a neoprene seal and are designed to IP65 protection level. Metal device plates are optional and hinges are available. All enclosures have spring action screws.

* Fibreglass range: a range of glass-reinforced polyester enclosures is also available. These all have screw-on lids, neoprene seals and are designed to IP65 rating unless otherwise specified.

Although Plastic Converter Industries is headquartered in KZN, the company has recently appointed a selling agent to service the Gauteng region.

For more information contact Steve Mummery, Plastic Converter Industries, +27 (0)12 654 6233, salesjst@telkomsa.net.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Conduction-cooled electronics cases
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
As electronics and processing systems become smaller and smaller, the need for versatile, compact form-factor cases that allow efficient heat dissipation increases. nVent Schroff offers customisable conduction-cooled ...

Read more...
19-inch lab racks
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff’s 19-inch lab racks are designed for laboratory environments, and come in mobile and stationary models. They offer a load-carrying capacity of 200 kg at the centre and a chassis depth of ...

Read more...
18-slot PXI Express chassis
25 September 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
Schroff nVent has expanded its Schroff product range for PXI systems by adding an 18-slot Schroff PXI Express system with a modular structure which is used in complex measuring and simulation applications. The ...

Read more...
Table-top instrument enclosures
25 September 2019, Avnet South Africa , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Plastic enclosures with mounting flange
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove sealing ...

Read more...
USB and utility plastic boxes
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Gainta’s G19XX series of utility boxes and USB boxes come in a range of materials and a variety of designs to meet an array of application requirements. The G1901G/G1901C and G1911G/G1911C are ideally ...

Read more...
Die-cast enclosures in extended lengths
25 September 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The 1590 die-cast enclosures family from Hammond Manufacturing consists of 41 different sizes in the standard rectangular and Stomp Box, painted variants. Stomp boxes, colour coded to provide quick ...

Read more...
Digital workflow eases selection of Schroff products
28 August 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...

Read more...
Sealed enclosures for industrial electronics
26 June 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...

Read more...
ebm-papst expands AxiBlade fan range
26 June 2019, Ebmpapst South Africa , Enclosures, Racks, Cabinets & Panel Products
Axial fans, which are used in air-conditioning and refrigeration systems such as evaporators, condensers and heat pumps, must fulfil high requirements with regard to air flow, energy efficiency and noise. ...

Read more...