mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

SD card connectors
9 August 2006, Interconnection

Hirose's DM1AA Series SD card connectors are a top board mount type with card push-in push-out ejection. A special 'card stopper' prevents accidental card fall-out.

In use the card is securely locked by a lock support, but is conveniently released when directly pulled with a force of approximately 4 N without mechanical damage occurring to the card or connector.

The robust connector end protects against excess card-insertion stress, while the contacts are also protected against incorrect card insertion. There is a grounding spring for SD I/O cards. The DM1AA measures 30,5 x 28,0 x 2,9 mm.


Credit(s)
Supplied By: Otto Marketing
Tel: +27 12 803 7373
Fax: +27 12 803 7374
Email: nelina@ottomarketing.co.za
www:
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Compression lugs and splices
    26 June 2019, TRX Electronics, Interconnection
    Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications. The connectors are designed for use with many different code and flex conductor ...
  • Test point pins
    26 June 2019, Vepac Electronics, Interconnection
    The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
  • Pin strips for KNX applications
    26 June 2019, Wiltron Agencies, Interconnection
    The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
  • High-temperature FFC/FPC connectors
    26 June 2019, Otto Marketing, Interconnection
    Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
  • Modular fibre-optic patch panel
    26 June 2019, Webb Industries, Interconnection
    The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
  • High-speed M12 connectors for transportation
    29 May 2019, Webb Industries, Interconnection
    Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
  • Board-to-board connectors
    29 May 2019, TRX Electronics, Interconnection
    A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm. The Fine Pitch series ...
  • Durable board-to-board connector
    29 May 2019, Otto Marketing, Interconnection
    Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain. While ...
  • Coax-to-PCB connectors
    29 May 2019, TRX Electronics, Interconnection
    Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
  • Wire-/board-to-board connectors
    29 May 2019, TRX Electronics, Interconnection
    Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
  • Choosing the right connector for harsh environments
    30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
    While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
  • Connectors 101 for lighting designers
    30 April 2019, Avnet South Africa, Interconnection
    Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.