XP Power has developed a family of 400 W AC/DC switching power supplies that it says enables more power to be delivered in an industry-standard 1U high enclosure. Most 1U units are limited to around 250 W but the new SMM400 series power supplies that have power densities of up to 380 mW/cm³, meets demand for higher power within a given space. The low profile units come in 24 standard models - 19 single-output and five dual-output versions - and carry agency approvals for communications, IT, industrial and medical applications.
The SMM400 has a universal 90 to 264 V a.c. input with a choice of output voltages from 3 V to 48 V d.c. The primary output is user adjustable by ±5%. It has remote sense, power-good and remote on/off functions built in, with a current share function and AC fail signal offered as options. The unit is available in either U-channel or enclosed formats, with integral cooling. Over-current, over-voltage and over-temperature protection are included.
Screw terminals are standard and IEC or Molex input connectors, and Molex output connectors, are available as options. The integral fan version provides the 23 CFM cooling needed for full power operation and the units are rated at 250 W with only convection cooling. The SMM400 operates in ambient temperatures from 0 to 50°C at full power with derating to 70°C.
The SMM measures 228,9 x 127 x 40,6 mm with fan and cover, excluding the input screw terminal block, or 203,3 mm long for the U-channel.
16-channel multicell battery monitor Altron Arrow
Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.
Read more...Reliable redundancy with the Mibbo M3DN Series Conical Technologies
Power Electronics / Power Management
Designed for use with two parallel-connected power supplies, the M3DN Series allows for true redundancy, making it ideal for mission-critical applications.
Read more...Automotive power-over-coax inductor RS South Africa
Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.
Read more...Rugged PSU for challenging conditions Conical Technologies
Power Electronics / Power Management
Built for rugged reliability, the Mibbo MFC Series delivers stable, efficient power in environments where moisture, dust, and temperature extremes are everyday challenges.
Read more...Enhance SiC device efficiency using merged-pin Schottky diodes NuVision Electronics
Editor's Choice Power Electronics / Power Management
Silicon carbide (SiC) has advantages over silicon (Si) that make it particularly suitable for Schottky diodes in applications such as fast battery chargers, photovoltaic (PV) battery converters, and traction inverters.
Read more...15 W power module with wide input range Brabek
Power Electronics / Power Management
RECOM’s miniature power modules provide 15 W output and operate over a wide input range of 18-264 V AC or 18-375 V DC.
Read more...Industrial-grade DIN rail PSU Conical Technologies
Power Electronics / Power Management
The Mibbo MTR960W is a reliable and cost-effective PSU option that delivers a solid 960 W of output power at 24?or 48 V DC.
Read more...Energy harvesting and Matter for smarter homes RF Design
Power Electronics / Power Management
Qorvo’s collaboration with e-peas on the Matter Enabled Light Switch marks another significant step in advancing Matter adoption across the IoT industry.
Read more...3-terminal filters for automotive applications RS South Africa
Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.
Read more...Simple battery charger ICs for any chemistry Altron Arrow
Editor's Choice Power Electronics / Power Management
The LTC4162 is a highly integrated, high voltage multi-chemistry synchronous monolithic step-down battery charger and PowerPath manager with onboard telemetry functions and optional maximum power point tracking.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.