Compel Electronics has extended its wide range of coaxial components with new coaxial adapters. These devices are made up of two interfaces and allow coupling to take place in particular conditions.
The two interfaces can belong to the same series of coaxial connectors or to different series. In the first case there can be three versions of adapters: male-male; female-female and male-female.
The first two are for the interconnection of devices that have two connectors of the same series or of the same type as the input or output interface. The male-female adapter, instead, is very often used as a safety component for the connector: it is connected to very expensive devices that have to sustain an extremely high number of manoeuvres, and these operations lead to rapid wear and tear of the connection interfaces. If this is the case, it is more economical to change the adapter rather than have to carry out possible repairs to the device.
The mixed adapters allow the connection of devices that have connectors belonging to different series as their interface. In this case, too, all possible combinations between male and female exist. The adapters are generally straight and free-hanging; in some cases, right-angled adapters or adapters with devices for fixing them to a panel may be required.
Compel Electronics supplies a wide range of coaxial adapters, covering the main series of connectors, such as: SMA, 1,0/2,3, 1,6/5,6, N, BNC, SMP, 7/16, Type 43, etc.
Blade terminals deliver greater power density Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...Connectors for energy storage systems Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...mBend cable assemblies Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version