Interconnection


Metal domes and arrays of domes

15 November 2006 Interconnection

Nicomatic offers its range of Switch'Air non-stick 4-leg and round domes in the following diameters: 4 mm (round), 5 mm (round), 6 mm, 8,4 mm and 12,2 mm (with and without dimple, activation forces from 140 to 420 g, nickel-plated or one side gold-plated). Taking advantage of its experience in the dome market, Nicomatic also launched a special type of metal dome, the Switch'air non-stick dome. This patented dome helps to create a cushion of air between the domes so that they do not stick together.

The domes can be ordered in bulk quantities, in tubes of 800 domes each or in sheets for custom made arrays. They can be designed with Kiss cuts (series of cuts in the polyester/adhesive carrier around the dome) or with a spacer (additional layer applied under the retaining layer with channels enabling a volume of air around the dome). This latter technique prevents any metal dome movement throughout the guaranteed life of the product.

They can be assembled on PCB or on a keypad. The assembly of the single dome or domes in tubes is made either with the tube work station or automatic placement machine.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Designing with PCIe
Spectrum Concepts Editor's Choice Interconnection
PCI Express has become the backbone of modern high-performance systems with each new generation promising higher bandwidth, but that performance comes with a cost.

Read more...
Connectivity solutions for hydrogen technologies
Hiconnex Interconnection
As the production distribution and utilisation of hydrogen continue to scale, connectivity becomes a key enabler for efficient energy transmission, data communication, and system control.

Read more...
Robust single-pole power connectivity
Hiconnex Interconnection
Designed for cable-to-cable and cable-to-equipment use, Radiall’s single-pole power connector support current ratings from 250 A to 750 A and operating voltages up to 1000 V AC or DC.

Read more...
M12 push-pull connectors
IOT Electronics Interconnection
Phoenix Contact’s M12 push-pull connectors with internal locking set a new benchmark for fast, secure, and space-saving connectivity in industrial automation.

Read more...
Versatile outdoor waterproof connectors
Vepac Electronics Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.

Read more...
Comprehensive range of data connectors
IOT Electronics Interconnection
Phoenix Contact’s comprehensive range of data connectors provides reliable connection solutions for modern networked applications across industrial, infrastructure, and commercial environments.

Read more...
Compact inline connector for aerospace
Hiconnex Interconnection
Radiall’s Small Inline Connector series is a fully qualified wire-to-wire solution designed to simplify harness creation, installation, and modification in aerospace applications.

Read more...
Compact hybrid power storage connector
IOT Electronics Interconnection
Phoenix Contact has introduced a new hybrid connector for electrical energy storage systems, designed to combine power, signal, and data transmission in a single, compact interface.

Read more...
MIL-spec connector series
Future Electronics Interconnection
The MIL-HD2 connector series from Amphenol is the company’s next-generation, SOSA-aligned solution engineered to meet the most demanding requirements of modern military embedded systems.

Read more...
DC connectors approved for 2000 V
IOT Electronics Interconnection
Phoneix Contact’s Sunclix DC connectors are now approved for system voltages of up to 2000 V in accordance with TÜV Rheinland’s new test specification, opening the door to higher-voltage PV designs and reduced system costs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved