Passive Components


Current transformers for various applications

21 March 2007 Passive Components

J&D of Korea, an ISO9001 company, is a manufacturer of current transformers for various applications. J&D is represented by Hillcor Holdings in South Africa and supported by E&BC Agencies.

The company has introduced a range of zero-phase current transformers for applications in: earth leakage (ELCB) ground fault interrupters; extreme low-current monitoring; and leakage current uses. The range of four basic types cover the 30 A to 120 A range with current ranges of 3 mA to 3/5/10 A. The turns ratio is 1000T/1.

J&D also offers a full range of current transformers from 0,1 class 1 mA to 500 A on selected products. Most comply to IEC62053-21 and are available in leaded or PCB mount. The company has the capability to custom-design in certain product areas.

Also available is a range of current transformers from 0,2 class - ideally suited for today's prepaid electricity meters. These current transformers are available from 5 A to 400 A with a current range of 1 mA/70 A through to 100 mA/300 A.

The high specifications on the company's product lines can enhance the design of power measurement, energy metering and calibration products.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Common-mode choke for 35 A commercial applications
Altron Arrow Passive Components
Vishay has introduced a new IHCM common-mode choke for high-current commercial applications up to 35 A. Available with a low-profile SMT construction, the IHCM-2321AA-10 is more robust than bulky toroid-based ...

Read more...
High-voltage semiconductor-based capacitors
RFiber Solutions Passive Components
MACOM Technology Solutions’ KV CAPS are high density, high working voltage silicon capacitors which employ a novel topology that essentially folds the parallel plates of the capacitors into three-dimensional ...

Read more...
Very compact X2 capacitors
Electrocomp Passive Components
A recent introduction by TDK is a new series of very compact EPCOS X2 capacitors for noise suppression. They are rated for 275 V a.c. and cover a capacitance spectrum from 33 nF to 1 µF. Depending on ...

Read more...
High-voltage chip divider in moulded package
Avnet Abacus Passive Components
Vishay has introduced the industry's first high-voltage chip divider to be offered in a ribbed, moulded package with compliant surface-mount leads. Designed to reduce component counts and improve TC tracking ...

Read more...
High-voltage resistors can replace standard resistor chains
Altron Arrow Passive Components
A new series of AEC-Q200 qualified thick-film chip resistors, with operating voltages up to 3 kV and in the 2010 and 2512 case sizes, has been introduced by Vishay. With their high operating voltages, ...

Read more...
Automotive quartz crystals and inductors
TRX Electronics Passive Components
Abracon automotive inductors and quartz crystals are AEC-Q200 qualified and available in a variety of package sizes, with wide-ranging operating temperatures from -55°C to +155°C. Designed for high-reliability ...

Read more...
Shielded power inductors
Electrocomp Passive Components
Bourns’ new Model SRP6530A shielded power inductor series is designed to meet the high current density and high temperature requirements of a variety of applications. These AEC-Q200 compliant inductors ...

Read more...
Broadband SMT conical inductors
RF Design Passive Components
Coilcraft’s BCR Series comprises conical inductors available in nine inductance values ranging from 0,22 to 8,0 µH. They are designed specifically for broadband and high-frequency applications across ...

Read more...
Industrial push-pull isolation transformers
Electrocomp Passive Components
Components in the Bourns Model PAD00x-T764 series are low-profile, small-footprint isolation transformers with a primary inductance of 475 µH, maximum 11 V·µs ET constant, 400 V d.c. continuous operation, ...

Read more...
MLCCs with new low-resistance soft termination
Electrocomp Passive Components
TDK has expanded its CN series of multilayer ceramic capacitors (MLCCs) that are the first of their kind. The new products – 10 µF capacitance in 3216 size (3,2 x 1,6 x 1,6 mm) and 22 µF capacitance in ...

Read more...